Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Packs/Racks/Baskets

$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included
$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
$39.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$22.95
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
$24.95
Topeak handlebar bag fixer for eBikes with display units.
$24.99
Topeak's Tri DryBag keeps your gear dry no matter the weather. Composed of water-resistant fabric, this top tube pack sports a flap that folds over the opening and prevents water penetration. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars in this streamlined bag.
$32.95
Carry all the necessities in Topeak's Aero Wedge Pack DX. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and it sports separate compartments for your mini tool and tube, and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.
$34.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
$34.95
Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
$54.95
Topeak's SideKick Wedge Pack features a unique, positive locking 2-piece mount that makes attaching and removing the pack a snap. Its unique side-opening design makes accessing your gear quick and easy and you'll have plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective strip adds safety and its semi-rigid construction makes the Wedge Pack durable and tough.
$54.99
Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.
$59.95
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
$69.99
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
$89.95
A quick mount handlebar drybag that can be used alone or mounted as an accessory bag atop our FrontLoader bag system. Featuring sonically welded seams, a roll top closure and weathertight zippers the BarLoader protects your valuable gear from dry dusty trails or rain when riding in wet conditions. CAPACITY - 6.5 L / 395 ci MATERIAL - TPU BAG ATTACHMENT - Quick release buckles and hook and loop fastener MAX LOAD CAPACITY - 3 kg / 6.61 lb ADDED FEATURES - Inner bag, Reflective printing, Shoulder strap SIZE - 31 x 25.8 x 8.9 cm / 12.2" x 10.2" x 3.5" WEIGHT - 276 g / 9.73 oz
$90.00
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb
$104.95
Topeak's Trolley Tote rear basket provides excellent versatility and convenience. Handy features include a telescoping handle and wheels which make the Trolley Tote perfect for shopping and running errands. It's made from tough plastic with an aluminum handle, and folds flat for storage. And, it's compatible with Topeak's QuickTrack rack system for easy on and off.
$109.95
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs
$115.00
Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb
$10.00
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
$10.00
- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm
$24.99
The Anything Bracket Pack is specifically designed for use with our Anything Bracket and Anything Bracket Mini, but you can also strap it around your seat rails and use it as a seat bag to hold a tube, CO2, multi-tool, or anything else you want to stash in there. - Constructed of 200D nylon - Mounts to Anything Bracket, Anything Bracket Mini or saddle rails - Roll-top closure - Includes strap - Weight: 50g
$30.00
Stash snacks, tools, and more with the EXP-R Series Cattail Rear Top Tube Bag. Taking up the under-utilized space at the top tube-seat tube junction, this bag is there when you need it and out of the way when you don’t. Add this extra bit of cargo capacity to your gravel bike to help you go the distance. - Body made of 1000D bluesign®-approved Cordura nylon - One-hand operable - Mounts with three hook-and-loop straps (included)
$40.00 - $50.00
The EXP-R Series Trillium Top Tube Bag puts your gravel ride gear right where you want it. It’s designed for quick-and-easy access to your nutrition, phone, battery bank, or other items without getting in your way. This streamlined gravel bike top tube bag is available in two sizes for light-and-fast missions or longer days in the saddle. - Direct mount-capable with compatible Salsa frames (Thumb Screws included) - Fits Salsa and non-Salsa frames with included straps - Body made of 1000D bluesign®-approved Cordura nylon - One-hand operable - Four-way stretch mesh exterior pockets for quick access to essentials - Tapered design to avoid rider contact - Available in two sizes (Large and Small)
$45.00 - $50.00
The EXP Series Saguaro Dry Bag is the center of our Saguaro Seat Bag system. It’s removable from the Holster (sold separately) for easy packing or bringing your valuables with you at rest stops. Waterproof materials and construction keep contents dry, and a purge valve lets you squeeze every last liter of capacity out of these bikepacking dry bags. Available in two sizes for all your adventures. - 210D nylon waterproof material - Welded construction
$60.00
The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum
$60.00
No one wants to stop when they’re in the groove on a gravel ride. Fortunately, the EXP-R Series Fireweed Handlebar Bag keeps the momentum going with on-the-go access to your ride essentials, from sunglasses to that much-needed energy gel at mile 80. Our gravel bike handlebar bag keeps your load stable and secure, won’t crowd your cables, and plays well with Out Front computer mounts. With easy one-handed use and plenty of compartments, Fireweed is there every mile of the way. - Mounts in front of or below handlebar to accommodate Out Front mounts - Included spacers prevent crunched cables - Tapered design pulls weight back and into the bike - Body made of 1000D bluesign®-approved Cordura nylon - One-hand operable - Four-way stretch mesh front and side pockets for quick access to essentials - Durable molded-tooth zippers - Mounts with two TPU-coated webbing straps and one bungee cord headtube attachment (included)
$65.00
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
$70.00
The EXP-R Series Campion Frame Bag brings functional cargo to nearly any gravel bike. Designed for the needs of gravel riders and racers, Campion adds secure, streamlined, and stable storage to your front triangle for nutrition, electronics, layers, a pump — whatever you need for a strong finish. Made from 1000D bluesign®-approved Cordura nylon and durable molded-tooth zippers, this gravel bike frame bag is durable enough to go the distance. Load up and line up for your next gravel event with Campion. - Universal front triangle fit - Body made of 1000D bluesign®-approved Cordura nylon - One-hand operable - Drive-side access, non-drive side slash pocket - Four-way stretch mesh external pockets for quick access to essentials - Protective rain flaps over durable molded-tooth zippers - Mounts with three TPU-coated webbing straps (included)
$89.00
The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design
$90.00
The EXP Series Agave Pannier has a healthy appetite for adventure and gear. The inside opens up to 12.5 liters of waterproof storage space for layers, a laptop, or anything else. On the outside, a stretchy mesh pocket keeps frequent needs like maps or sunscreen in easy reach, or provides a spot to stash dirty socks and snack wrappers while on tour. With adjustable hardware that minimizes movement and fit issues, The Agave Pannier brings a little ease to any Adventure by Bike. Pack it up and pedal on. - Waterproof coated 400D nylon - Welded waterproof construction - Rixen and Kaul hardware for stable and secure fit - Includes hardware shims for adjustable fit - Four-way stretch mesh outer pocket - Reflective side patches for visibility - Designed to avoid heel strike - 12.5-liter capacity - Sold individually
$90.00
The EXP Series Cholla Half-Frame Bag keeps ride needs easy to reach, but doesn’t block bottles. Six sizes help maximize space (and aesthetics) on a wide range of Salsa frames — and other bikes, too. And forget about strap rub with direct-mount capability on compatible Salsa frames. The Bluesign-approved Cordura nylon and molded-tooth zippers will stand up to dusty trails and daily use. Load up this half-frame bag and go find your next Adventure by Bike. - Direct-mount capable with a wide range of Salsa Bikes - Compatible with all Salsa and non-Salsa bikes with included One-Wrap straps - Inclusive fit with six sizes - bluesign®?-approved 1000D Cordura nylon body - bluesign®?-approved 400D nylon lining - Durable molded-tooth zippers - Cut-and-sew construction - Drive-side access, non-drive-side slash pocket - Fitment designed for two bottles
$98.34
The EXP Series Fat Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Designed to fit: Mukluk Aluminum, Mukluk Carbon, Blackborow, and Blackborow V2
$99.99
The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.
$99.99
The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.
$104.00
The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes
$110.00
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
$120.00
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$120.00
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$160.00
Take your gravel bike from bare to cargo-ready with the EXP-R Series Bundle. This gravel bike bag collection features three of our EXP-R Series bags, designed to carry all your ride gear securely and keep it easy to access while you’re rolling. Set up for gravel success with the EXP-R Series Bundle. - Includes Campion Frame Bag, Fireweed Handlebar Bag, and Trillium Top Tube Bag (Small) - Bag bodies are made of 1000D bluesign®-approved Cordura nylon - All mounting straps and hardware included
$155.00
This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.
$179.00
The Terrapin® 8L is the smaller version our flagship Terrapin® System 14L. The Terrapin 8L maintains all of the Terrapin's best known features including a mount that stays on the bike with a custom fitted drybag for easy packing. With 8 liters of capacity, it is perfect for most lightweight bikepacking trips and fits bikes with low tire clearance. It is perfectly sized for small framed bikes, including plus bikes with inherently diminished clearance. The Indie-Rail attachment system is a progression from conventional bikepacking bag mounts where the rail straps are fixed to the top center of the bag. With Indie-Rail, each saddle rail is cinched down hard to the sides of the bag virtually eliminating side to side bag sway without the need for external hardware. We combine this with rigid internal structure and active camming buckles to prevent straps from slipping on rough terrain. The mount is stiffened on all sides including an external plastic bottom sheet which protects the bottom of the bag like a fender. A composite internal top sheet provides a solid and stable platform for the strap points and transmits the vertical load to the seatpost connection. - Indie-Rail attachment system and active camming hardware maximizes stability without added hardware - Radio frequency welded drybag with one way, low profile purge valve - Adjustable capacity; Fold under the top storage deck and use top mounted buckles to secure smaller loads - X-Pac panels that are two times as abrasion resistant as standard VX material - Protective external plastic bottom frame sheet - User friendly side release buckles to secure drybag - Aluminum hardware at high stress points - Composite internal top frame sheet - Hypalon slots on drybag for rear light attachment - Bungee loop on top of holster for additional storage - Foam stiffened side panels with fiberglass compression stays - Carbon seatpost friendly Fit: Minimum 7 in / 17.8 cm of tire clearance (shown as line A) from saddle rails to tire. Important information on use and fit: - This product is not designed for use with dropper seatposts. - This bag is for carrying soft, pliable objects. Sufficiently pad any hard edge objects like cookware to prevent premature wear. - It is mandatory to check tire clearance prior to use, especially with full suspension bikes. Bag contact with a tire can cause a bad wreck and ruin your day. Tire damage to the bag is not covered by warranty. - Please evaluate how your system works well before a planned trip.
$65.99
Designed to fit the M and H style Brompton handlebars, the 1.2 Litre City Bar Bag is made from tough fabrics and is tape sealed - making it completely waterproof. Perfect for carrying keys, phone, and wallet. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 90g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.
$65.99
The City Saddle bag is designed for any folding bicycle. Constructed from waterproof fabrics, it comes in two sizes to accommodate a range of gear like clothing, off-the-bike footwear, or tools. Both sizes are tape-sealed and completely waterproof. The bag also features an extendable bottom stabilising strap which fits easily around the suspension block on all Brompton bicycles. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 110g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.
$164.99
The Restrap Full Frame Bag allows you to easily increase the load out you carry for comfortable bikepacking and touring. The bags come in three sizes, designed to fit most standard frames and geometries. Two Aquaguard YKK zips on the drive side of the bag allow easy access to the top and bottom sections of the bag, with internal velcro dividers to separate the compartments. These dividers aid the structure of the bag when fully packed, but also fold away to allow use of the full internal space of the bag if needed. The non-drive-side of the bag contains a document pocket, useful for storing smaller items. The bag is made from durable, textured nylon outer and VX21 fabrics, with a wipeable lower section that means the bag is easy to keep clean when riding off-road or in adverse weather. Rubberized strapping provides extra grip to the frame and webbing straps, with easy-to-use cam locking buckles, keep the bag sitting securely and free of movement while riding. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 275g / 322g / 368g (small/medium/large) Capacity - 6L / 7.5L / 9L (small/medium/large) - Body is made out of 1000D Textured Nylon & VX21 fabrics - 100% handmade in Yorkshire, England - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.
$20.50
- Tool Carrier - Sleek tool holder designed to securely hold the Park Tool MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool - Can be mounted or strapped to most bike frames (hardware not included)
$8.00
The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad
$9.00
This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws
$14.00
For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle
$35.00 - $40.00
Minimalism to the max is a good description of the ultra-lightweight seat pack for road bikes and mountain bikes. The Micro Two was specially designed for those demanding tours when every gram counts. In addition to being 100% waterproof, the pack offers you space enough for a few critical items such as a replacement tube, a bike kit, or first aid materials. Its roll closure and elastic drawstrings allow you to collapse its size down to a minimum. And thanks to its extremely small dimensions, it can be mounted to your bike in an extremely space-saving manner. Simply attach the mounting bracket to your seat stays. Then attach or detach the pack with a single hand using the snap buckle. While the snap-on system was again enhanced for user-friendliness, the Micro Two remains compatible with all previous models. Further Features: - PVC-free, polyurethane-coated nylon fabric - No protruding plastic parts on the inside - Includes the mounting bracket - Simple attachment - Reflector
$55.00
If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier
$55.00
The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers. The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers. Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach. Given their modular design, the bags can also be used individually when you're out on short trips. FEATURES: - Each unit in the modular system can also be used individually - Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L - Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers
$55.00 - $65.00
This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear. The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access. The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back. Further Features: - PVC-free, polyurethane-coated nylon fabric - Ideal for use with mountain bikes, road bikes, and touring bikes - No protruding plastic parts on the inside - Adjustable attachment below your bike seat - Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle) - Scotchlite 3M reflector for added protection at night - Daisy chain for the optional attachment of a rear light
$65.00
Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. Specifications: - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant PU-coated nylon fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs
Page 1 of 2 Next page