Filter By:
- Parts & Accessories (30)
- Backpacks (3)
- Baskets (3)
- Frame Bags (17)
- Gear Bags (5)
- Handlebar Bags (8)
- Panniers (7)
- Rack-Top Bags (trunks) (4)
- Show More Categories
- Racks (18)
- Seat Bags (16)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Packs/Racks/Baskets
$235.00
Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety.
- Panniers (pair) with classic lid closure for large packing volume
- Sides of PS 490 nylon material, front and back of PD 620
- QL2.1 mounting system for racks with max. 16 mm tube diameter
- 20 mm hook available as separate accessory (e.g. for E-bikes)
- Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack
- Hooks adjustable without requiring tools
- Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack
- Including integrated inner pocket and shoulder strap
- Due to its symmetrical form it is possible to use only one bag on left or right side
- The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow
- The edge protector prevents contact with spokes and abrasion
- Simultaneous use of Ortlieb Travel-Biker possible
- Highly reflective 3M Scotchlite reflector
- Easy to clean inside
$170.00
Plenty of space for your day at the office—no matter whether your office is in a meadow, a cafe or an old factory building on the other side of town. The Ortlieb Commuter Daypack City is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll closure, its large main compartment, and its padded notebook compartment, it provides a secure place for your documents and other gear no matter what the weather. And thanks to its outstanding carrying comfort, it's always a pleasant companion to take along.
Further features:
- Reinforced underside
- Air-permeable shoulder straps
- Back padding with ventilation channels
- Removable breast and waist straps
- Zippered front pocket (not waterproof)
- Loops for rear light and U-lock
- Reflective yarn and reflective logo for more protection at night
- Dimension notebook compartment: 39cm x 27cm x 2.5cm / 15.4" x 10.6" x 1"
$55.00
If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B.
The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes.
FEATURES:
- Stable and tip-resistant even when empty
- Two side mounts for water bottles, etc.
- Flat mesh pocket (ideal for a bike lock)
- Foam padding on the sides and bottom
- Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers
- Permits access to the inside pocket of your bike pannier
$65.00
Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm.
Specifications:
- Ultralight, waterproof bag (single pocket) with roll closure
- The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters
- Abrasion-resistant PU-coated nylon fabric
- Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system
- Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm
- The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps
- Ultra-fast installation, with one click the bag snaps in to place
- The removal is just as fast, simply move the release lever and pull the bag upwards
- The robust Quick-Lock S mounting plate remains mounted to the bicycle
- Low profile locking elements ensure snag-free use
- Internal stiffener
- Reflective ORTLIEB logo
- Maximum load 3kg / 6.6lbs
$75.00
WATERPROOF FORK BAG WITH ROLL-TOP CLOSURE FOR BIKEPACKING
Fast, faster, Fork-Pack with Quick-Lock S adapter system. The all-new and innovative adapter system is ideal for attaching bags like the waterproof Fork-Pack to the fork of your bike. Weighing just 290 grams (including adapter), the fork pack offers approximately 4,1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30 mm to 42 mm. QLS bags are primarily designed for attachment to the fork, but can be attached to all vertical tubes using the accessories supplied.
The Fork-Pack (205 grams) can easily and quickly be attached and removed from the adapter plate (85 grams) with just one hand in seconds. The nylon bag is abrasion-resistant, PVC-free and, of course, sustainably made in Germany. The maximum load is three kilograms / 6.6 lbs.
Attention: Not suitable for mounting to carbon forks without "braze-on" eyelets, tapered fork blades or frame tubes
$150.00 - $170.00
The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet.
The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps.
FURTHER FEATURES:
- Ideal for all bikes with limited triangle space
- Reflecting logo
ADVICE: Suitable for carbon fiber frame.
$190.00
Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear.
While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure.
With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.
$170.00
The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear.
Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain.
FURTHER FEATURES:
- Hooks for attaching an ORTLIEB Accessory-Pack
- Also suitable for carbon handlebars
- Mounting straps with convenient Velcro closures
- Lightweight design
- High luminosity 3M Scotchlite reflectors
$160.00
WATERPROOF HANDLEBAR BAG WITH QUICK RELEASE!
A new fastening system, the Bar-Lock, enables the waterproof Handlebar-Pack QR (Quick Release) to be attached
and removed in no time at all. This means that you can quickly and easily take off the bag and carry it with you when
you reach your destination. Thanks to the bar-lock cord attachment, this bikepacking bag remains stable and secure
on the handlebars, even on rougher terrain. Internal compressions and the roll closure adjustable height ensures
the safe storing of gear or equipment. Two further hooks with CamLock fasteners on the front create further compression
options.
The handlebar pack QR has an 11-liter volume, weighs only 530 grams and is loaded from above. In addition to bikepacking,
this pack would be a great asset for long gravel rides or races thanks to its narrow 32 centimeter design.
Lateral outer pockets allow small accessories or snacks to be stowed away yet accessible while riding. The PVC-free
bag is made of abrasion-resistant nylon fabric and is, of course, sustainably produced in Germany. The maximum
load is five kilograms.
Pair the bag with the extra Handlebar-Pack QR Inner Pocket to keep things tidy, and conveniently store and access
your cash, cards or a mobile phone.
- Reflective Logo and Reflector increase safety
$35.00 - $40.00
Minimalism to the max is a good description of the ultra-lightweight seat pack for road bikes and mountain bikes.
The Micro Two was specially designed for those demanding tours when every gram counts. In addition to being 100% waterproof, the pack offers you space enough for a few critical items such as a replacement tube, a bike kit, or first aid materials. Its roll closure and elastic drawstrings allow you to collapse its size down to a minimum. And thanks to its extremely small dimensions, it can be mounted to your bike in an extremely space-saving manner. Simply attach the mounting bracket to your seat stays. Then attach or detach the pack with a single hand using the snap buckle. While the snap-on system was again enhanced for user-friendliness, the Micro Two remains compatible with all previous models.
Further Features:
- PVC-free, polyurethane-coated nylon fabric
- No protruding plastic parts on the inside
- Includes the mounting bracket
- Simple attachment
- Reflector
$55.00
The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers.
The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers.
Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach.
Given their modular design, the bags can also be used individually when you're out on short trips.
FEATURES:
- Each unit in the modular system can also be used individually
- Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L
- Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers
$6.00
Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack.
- 2 inserts measuring 8 mm
- 2 inserts measuring 11 mm
$7.00
For all models with the QL2.1 system.
If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook.
DETAILS:
- 1 anchoring hook and mounting screw
$14.00
For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts).
- 2 QL2.1 mounting hooks (18 mm) and adjustable handle
$15.00
For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two
Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit.
- 2 QL2.1 hooks (16 mm) with plastic handle
- 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm
$110.00
The ultimate bike rack! The Ortlieb Rack Three offers you the right solution, whether you're on your way to work, the grocery store, or around the world. One unique advantage of this all-purpose bike rack is its compatibility with all Ortlieb attachment systems. Outfitted with convenient mounting elements for the QL3 and QL3.1 systems, the Rack Three allows you to attach all Ortlieb bags directly to your bike without any other modifications. If you want to use the Rack Three exclusively for your QL2.1/2/1 bags, you can easily remove the attachment elements for the QL3.1/QL3 and thereby create even more space for your panniers.
The Rack Three's double-rail design allows you to attach all bike bags with a QL2.1, QL2 or QL1 system to a top level or a lower level. Selecting the lower level gives you the option of simultaneously attaching a bike basket or a Trunk-Bag to the top of your bike rack and expanding your overall stowage space.
Rack Three is suitable for bicycles with wheel sizes of 26" and 28".
- City and touring aluminum rack with two mounting levels
- For wheel size 26"/28" (1 size)
* Width of support surface 120 mm
- Compatible with all Ortlieb mounting elements (QL1, 2, 2.1, 3 or 3.1 system)
- With three integrated QL3/QL3.1 mounting elements on each side
- Further mounting components are not required for QL3/QL3.1 bags
- Suitable for direct mounting of QL3/QL3.1 products (e.g Back-Roller Urban, Single-Bag, Office-Bag, Downtown Two, Vario, City-Biker, Commuter-Bag)
- QL3/QL3.1 lock heads can be easily removed for fixing panniers with QL1, QL2 or QL2.1 system; dummy plugs for borings included
- Second mounting level for simultaneous use of pannies on sides and basket or Trunk-Bag on top
- Mounting for optional rear light (not included)
- Maximum capacity: 30 kg/66 lbs.
$7.00
For all models, including the Back-Roller and Sport-Roller, with Stealth buckles
Need to replace a pair of broken buckle?
- 2 plastic buckles (male and female ends, 25 mm, black)
$55.00 - $65.00
This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear.
The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access.
The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back.
Further Features:
- PVC-free, polyurethane-coated nylon fabric
- Ideal for use with mountain bikes, road bikes, and touring bikes
- No protruding plastic parts on the inside
- Adjustable attachment below your bike seat
- Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle)
- Scotchlite 3M reflector for added protection at night
- Daisy chain for the optional attachment of a rear light
$9.00
This mounting set allows you to attach your Saddle-Bags to other bicycles.
For all Saddle-Bag, MudRacer and Micro models.
- 1 mounting set for Saddle-Bags, including screws
$170.00
Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes.
This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems.
FURTHER FEATURES:
- Reinforced fabric at all points of contact to the seat
- Vertical daisy chain for rear light
- Also suitable for carbon seat stems
- Lightweight design
- Four 3M Scotchlite reflectors available for full extension
$180.00
Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike.
Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem.
FURTHER FEATURES:
- Reinforced fabric at all points of contact to the seat
- Vertical daisy chain for rear light
- Also suitable for carbon seat stems
- Lightweight design
- Four 3M Scotchlite reflectors available for full extension
$190.00
Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes.
DETAILS
Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post.
The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender.
OTHER PRACTICAL FEATURES:
- Our reflector ensures added visibility and safety
- A daisy chain allows for the attaching of a rear light
COMPATIBILITY NOTICE
YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE:
1. The saddle rails must have a bend of at least 34°.
2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle.
3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.
$8.00
The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination.
CONTENT:
- 1 shoulder strap with plastic pad
$145.00
Good news for all of those on the lookout for a convenient, waterproof bag to transport their belongings: the proven ORTLIEB "bike trunk" is now available with a Velcro roll closure! The closure of the Trunk-Bag RC (Roll-Closure) also serves as a convenient carrying handle. With a 12-liter payload and a shoulder strap, the waterproof bag that mounts on top of your bike rack is ideally suited for longer tours and brief forays to the supermarket. Even when the bag is fully loaded, your smartphone, wallet, and keychain remain quickly accessible thanks to the inside pocket and carabiner, as well as an additional, non-waterproof exterior pouch. The Rack-Lock Adapter, the winner of the Eurobike Award, ensures that the bag fits on virtually any bike rack with a width of 60 to 160 mm. Clip it on, secure it and remove it again. It's a snap!
$95.00 - $100.00
NEW: MOUNT NOT INCLUDED From January onward you must choose the handlebar mount that is right for your bike.
Made of durable and waterproof polyester fabric, the ORTLIEB Ultimate Six Classic is a compact handlebar bag that plays a key role in the gear management plan of all bike touring enthusiasts. Depending on the model, the Ultimate Six Classic offers a 5.7 or 8.5-liter payload and ample space for your valuables and the things you want to have at the ready on your tour. The transparent and rainproof flap compartment that comes with the five-liter model offers 21 x 12 cm interior space for the convenient storage of smartphones, GPS devices and maps. And you can naturally operate your touchscreen device through the transparent cover.
The two larger models enable the use of different inserts in case you want to securely stow any special gear such as your high-performance camera while you're underway. All of the handlebar bags come with a detachable shoulder strap, a reflector, and a zippered inside pocket. All Ultimate Six models are compatible with all ORTLIEB mounting sets, as well as Rixen & Kaul Klickfix mounting systems. An extensive range of accessories is also available for all of our handlebar bags.
- Reflector made of high luminosity 3M Scotchlite material on front of bag
- Small reflector made of black reflective film on base of the mounting unit
- Maximum payload: 5 kg
- Accommodates the attachment of a map case and Safe-it in sizes S to XL (all models from 2017)
- Zippered inside pocket with carabiner for keychains
$150.00
There’s a right waterproof backpack for everyone: The Velocity PS! The courier-style daypack Velocity is a favorite in the ORTLIEB collection.
What's new: Handy details, new color concept and perfect if you want to do without the conventional tarp looks, because Velocity PS comes in a sustainable PVC-free material and you can go with the new PU coated nylon fabric.
Designed with the ORTLIEB Messenger Bag in mind, this compact backpack is the perfect choice for students, or commuters, for every day, school, sports, or work. Velocity PS is sturdy and waterproof. Its trademark, the foam ventilated back, ensures carrying comfort along with breathability. Both the foam back and the ergonomic shoulder straps are improved for increased carrying comfort. The waist strap is adjustable or can be easily removed.
Easy access roll-top closure with hook and loop guarantees 100% waterproofness and makes packing speedy and simple. In case the hook and loop fastener wears out after years of intensive use, simply return your pack to our ORTLIEB customer service and we will give your Velocity a second life. All components can be easily exchanged or repaired which makes Velocity a sustainable and lifelong companion.
What’s new on the inside? All Velocity backpacks now feature an internal zippered organizer and a padded laptop sleeve fixed at the base and top taking computers (max. 15.4") and keeping them safe and dry.
The lower edge protectors resist abrasion and wear. A bike light or helmet can be fixed to the back.
Like all ORTLIEB products, Velocity PS is sustainably made in Germany.
FURTHER FEATURES:
- Carrying handle
- Waist and sternum strap, adjustable and removable
- Zippered organizer with laptop sleeve
$178.00
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into.
Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- The Divide Fat fits up to 26×5" or 27.5×4.6" tires.
- Front or rear mountable.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The main rack frame is made of 1/2" (13 mm) diameter tubing for durability and the pannier rails are 3/8" (10 mm) diameter to fit all panniers.
- The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck.
- The deck measures 5.1" x 12" (130 mm x 306 mm)
- The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes.
- The Divide Fat come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Divide has a load capacity of 55 lbs when eyelet is mounted. For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs!
- Powder coated a sleek and refined shade of black
- Made in Taiwan
- Stainless Steel mounting hardware
- Lifetime warranty!
$284.99
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into.
Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- Fits up to 29 x 3-inch tires, with room for fenders.
- Front or rear mountable.
- Works with all dropper posts.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers.
- The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck.
- The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes.
- The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Divide has a load capacity of 55lbs when eyelet mounted.
- For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs!
- Powder coated a sleek and refined shade of black.
- 960g including all hardware and extenders.
- Made in Taiwan.
- Lifetime warranty!
$284.99
The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you.
Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into.
Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- The Short fits tires up to 27.5 x 2.8" or 700c x 50mm.
- The Tall is for maximum mud clearance and fits tires up to 29 x 3.25"
- The Elkhorn comes in two sizes; Short and Tall.
- The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm.
- The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25".
- Front or rear mountable.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The rack is made from 1/2" (13mm) diameter tubing.
- The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Elkhorn has a load capacity of 25 lbs/11.34kg.
- Rack weight (Short): 623 grams with 6" extenders.
- Rack weight (Tall): 652 grams with 6" extenders.
- Powder coated a sleek and refined shade of black.
- If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance.
- Made in Taiwan.
- Lifetime warranty
$168.00
The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you.
Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into.
Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- The Elkhorn comes in two sizes; Short and Tall.
- The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm.
- The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25".
- Front or rear mountable.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The rack is made from 1/2? (13mm) diameter tubing.
- The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Elkhorn has a load capacity of 25 lbs/11.34kg.
- Rack weight (Short): 623 grams with 6" extenders.
- Rack weight (Tall): 652 grams with 6" extenders.
- Powder coated a sleek and refined shade of black.
- If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance.
- Made in Taiwan.
- Lifetime warranty
$19.99
The Muck-Off Essentials case is large enough to hold your smartphone or with a handful of tools. Soft inner divider helps prevent damage to a spare tube or phone. External straps allow case to be attached to a MOLLE system or other bags, expanding their capacity.
- Inner Zip pocket to store keys/cash/coins
- Fits plus sized smartphones
- Size: 17 x 9 x 2cm
- MOLLE Webbing straps for attaching MOLLE accessories or onto other bags
- Enough space to store your spare tube, tire levers, CO2 and mini-tool
$24.99
The Muck-Off Essentials case is large enough to hold your smartphone or with a handful of tools. Soft inner divider helps prevent damage to a spare tube or phone. External straps allow case to be attached to a MOLLE system or other bags expanding their capacity.
- Inner Zip pocket to store keys/cash/coins
- Fits plus sized smartphones
- Size: 17 x 9 x 2cm
- MOLLE webbing straps for attaching MOLLE accessories or onto other bags
- Enough space to store your spare tube, tire levers, CO2 and mini-tool
$34.99
Our Utility Frame Strap & Waterproof Cargo Bag Bundle is the perfect add-on for any rider. You'll get the all-new Utility Frame Strap, which is a super tough strap to secure riding essentials to your frame, whilst our Cargo Bag will keep everything dry and protected against the elements with its epic levels of waterproofing. You'll be able to mount a spare inner tube, C02 inflator kit, Rim Stix, and your other favorite on-the-go repair tools with ease, so you're prepared for anything your ride throws at you!
Don't let a puncture hold you back on a ride. Store all your riding essentials on your bike frame with the Muc-Off Cargo Bag and Utility Frame Strap. It's waterproof, tough, and durable, withstanding the harshest conditions.
HIGHLIGHTS:
- Capacity - Fits up to a 29" tube, CO2 inflator Kit, tire levers, money, cards, and more!
- Waterproof bag with welded seams
- Abrasion-resistant and made from long-lasting materials
- Roll-top strap and buckle closure system
- Protects accessories from water, snow, mud, dust, and sand
- Long adjustable strap means it can be fitted on most frame tubes
- Durable and tough as nails webbing with bar tack stitching is designed and built to last
- Super strong hook and loop fastener allows quick and easy removal and installation
- Flexible, high strength elastic loop system with super grippy rubber tubing fits a variety of inner tube sizes and other items
- Specific CO2/tire lever elasticated straps keep your items safe and secure without rattling around
- Crazy grippy backing material means your loaded strap stays in place over the harshest terrains
WHAT'S INCLUDED:
- 1 x Utility Frame Strap - Black
- 1 x Waterproof Cargo Bag - Black
$27.99
The perfect balance between lightweight and capacity. Large enough to accommodate a spare inner tube, tire levers, multi-tool, a wallet, and keys, but compact enough for adventure.
- Water resistant 1000d material with YKK zipper
- Interior division for all your essentials
- Reflective logo, webbing to clip light
- Angled straps achieve a low profile fit
- No-snag Velcro and amara leather limit abrasion
$33.99
- Water resistant 1000D material with YKK zipper
- Interior division for all your essentials
- Reflective logo, webbing to clip light
- Angled straps achieve a low profile fit
- No-snag Velcro and Amara leather limit abrasion
- Length: 9 in, Width: 5.1 in, Depth: 3.7 in
- Volume: 68.5 cu in
$24.99
The perfect balance between lightweight and capacity. Large enough to accommodate a spare inner tube, tire levers, multi-tool, a wallet, and keys. But compact enough for adventure.
- Water resistant 1000D material with YKK zipper
- Interior division for all your essentials
- Reflective logo, webbing to clip light
- Angled straps achieve a low profile fit
- No-snag Velcro and Amara leather limit abrasion
$31.99
Plenty of room and durability to support you on epic rides. If being prepared is important the super cache can carry enough to accompany you on epic rides.
- Water resistant 1000D material with YKK zipper
- Interior division for all your essentials
- Reflective logo, webbing to clip light
- Angled straps achieve a low profile fit
- No-snag Velcro and Amara leather limit abrasion
$26.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle.
- On-bike storage solution
- Inner sleeve to compress the tube
- Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc.
- Wide strap and durable metal buckle
- Silicone and rubber grip for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 4oz
$4.00
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
$42.00
Want to take your workstand with you? These padded, heavy-duty Tote Bags allow you to easily store and transport your Feedback Sports workstand (sold separately). These great cases will protect your stand and they have sturdy handles for easy carrying.
- Choose from Ultralight, Pro Elite, Pro Classic, Sport Mechanic, Recreational, and A-Frame work stands
- Heavy-duty bag for toting and storage
- Full zipper and carrying straps
$9.99
- Stretch web secures those hard-to-hold items
- Great for any rack
- 4 easy-to-handle molded hooks attach anywhere
- Dimensions 11" x 11"
$34.99
All-alloy bike rack securely mounts to bike to hold up to 40 lb.
Features
- Secure: Triangulated design holds cargo
- Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible
- Construction: Lightweight aluminum with stainless steel hardware
- Weight: 1.53 lbs / 694 grams
- Max Weight: 40 lb / 18 kg
$19.99
- Expands up to 2x size to securely grip any shape
- Weatherproof material will not deteriorate
- Molded non-scratch hooks
$65.00
We just improved upon a classic - the Classic Light is exactly what your everyday ride has been missing. Lightweight meets heavy-duty for a pack that is durable, adaptable, and comfortable for any length adventure. The sleek design features a 2-liter Crux Reservoir with Quicklink disconnect and an extra 2-liters of cargo space. The Air Support Light Back Panel and a ventilated harness ensure effective cooling and ultimate breathability. The bungee overflow allows you to quickly stash an extra layer without missing a beat. With a secured zippered pocket to store your keys and phone, plus an adjustable sternum strap for a custom fit and increased stability, you have everything you need to hit the trail, stay hydrated, and have fun out there.
$59.95
This versatile rack has a 60 lb. weight limit and is ideal for connecting the Burley Dash® RM child bike seat. When you aren't using the bike seat, the Burley Rear Rack can accommodate panniers.
$99.95
Classic roll-top design and heat-sealed seams make this spacious 75 liter dry bag waterproof. Constructed with 500D tarpaulin fabric that is both tough and lightweight. Includes shoulder strap and carry handles.
- Designed for Burley Coho XC and Flatbed bike trailers
$69.99
This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.
$49.99
Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.
$9.99
Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets.
CONSTRUCTION
• Aluminum
ADDED BENEFIT
• Makes the Streamliner rack (sold separately) even more versatile
Standard Waistbelt
Fits Rambler and Sanction Bags
For those who know they will be carrying a little extra weight on their backs, a detachable and substantial waistbelt is available.
Fully adjustable waist size
Secured by velcro strip
Made in America with a lifetime warranty
Previous page
Page 2 of 2