Parts & Accessories

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

Genuine replacement parts Assemble your cargo rack properly with genuine replacement parts. Genuine Backrack parts assure proper rack-to-bike connection. - Straight rack stay type - Mounting hardware not included - 300mm Straight

Genuine replacement parts Assemble your cargo rack properly with genuine replacement parts. Genuine parts assure proper rack-to-bike connection. - Mounts under the fender - Compatible with 27.5"bikes, 38.1mm fenders

Genuine replacement parts Assemble your cargo rack properly with genuine replacement parts. Genuine Backrack parts assure proper rack to bike connection. - Mounting hardware not included - Assure proper rack-to-bike connection - Contains: 10mm spacer, L-bracket and anti-rotation bracket

For your most precious cargo Fetch+ 4's generously sized cargo box has room for a child seat in addition to the two reclining chairs that come with the bike. Use this adapter for Britax Römer car seats. Easily mount a Britax Römer child seat to your Fetch+ 4 with this convenient adapter. - Mounts to the front of the cargo box with the child seat facing the rider - Maximum combined weight (child seat + child) must not exceed 18kg (39 lbs.) - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.) - Adapter for Maxi-Cosi, Cybex, and Nuna child seats available separately - Includes all installation hardware

For your most precious cargo Fetch+ 4's generously sized cargo box has room for a child seat in addition to the two reclining chairs that come with the bike. Use this adapter for Maxi-Cosi, Cybex, and Nuna car seats. Easily mount a Maxi-Cosi, Cybex, or Nuna child seat to your Fetch+ 4 with this convenient adapter. - Mounts to the front of the cargo box with the child seat facing the rider - Maximum combined weight (child seat + child) must not exceed 18kg (39 lbs.) - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.) - Adapter for Britax Römer child seats available separately - Includes all installation hardware

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Topeak handlebar bag fixer for eBikes with display units.

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm

Lower mount kit for all Salsa's Alternator Racks (sold separately)

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs. - Provides 3-pack mounts on any thru-axle fork - Axle Pack is rated to 10kg per pair - Four mounting points you can also choose to run your gear higher or lower depending on your needs