Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools
$102.95
Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop.
- High-torque, industrial steel wrenches
- Straight hex shaft on the short side, ball end on the long side
- Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm
- Comfortable, ergonomically designed nylon handles fit perfectly in your hand
- Durable wall/pegboard mount tool holder allows easy access and organization
$102.95
Engineered for fit, function, and leverage, these L-shaped shop-quality Torx compatible wrenches are a must have for every workshop.
- High-torque, industrial steel wrenches
- Torx compatible drivers at each end
- Includes T6, T8, T10, T15, T20, T25, T30, and T40
- Comfortable, ergonomically designed nylon handles fit perfectly in your hand
- Durable wall/pegboard mount tool holder allows easy access and organization
$102.95
Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.
$101.95
Designed and built with the specific needs of the bike mechanic in mind. The RP-SET.2 includes five professional quality pliers for internal snap rings and one for external snap rings. Pliers are made from forged, heat treated cro-moly steel with a return spring and vinyl dipped grips.
RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching)
RP-2: 1.3mm bent internal. Opens from 22mm down to 2mm (center to center)
RP-3: 1.3mm bent external. Opens from 2mm (center to center) up to 18mm
RP-4: 1.7mm bent internal. Opens from 21mm down to 2mm (center to center)
RP-5: 1.7mm straight internal; Opens from 25mm down to 0 (tips touching)
$99.95
Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.
$94.95
Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups.
$92.95
Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.
$90.95
With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.
$89.95
This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike.
- Cuts hydraulic brake hose (does not cut steel braided hydraulic hose)
- Installs press-in style barbed hose inserts
- Replaceable parts including push pin tip and stainless steel blade
- Hard anodized body for improved tool wear
- Lightweight, CNC machined aluminum body
Replacement parts:
- 2494K Cutting Blade (set of 2)
- 2497 Push Pin Tip
$87.95
- Versatile digital scales built to accurately weigh bikes, frames and components
- DS-1 hanging scale designed to be clamped into a repair stand or hung from the silicone coated hook
- DS-1 measures in pounds and kilograms to the tenth position up to 25kg (55lb)
- DS-2 tabletop scale is perfect for weighing small parts and components and includes a tare function to exclude weight of container
- DS-2 easily switches between grams and ounces and has a 3000g (106oz) capacity
$84.95
The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage of shifting problems.
- Gauge bar made of heavy gauge, chrome plated steel
- Adjusts to fit 20" to 29"+ wheels
- Replaceable threaded tip
- Upgraded large inner shaft for added strength*
- Tighter tolerances for improved accuracy*
- Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers*
*Compared to DAG-2
$84.95
The RTP-1 combines two ride-saving tools — the MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool — into one ultra-portable package. The included tool holder securely holds both tools without adding excess weight, and can be mounted or strapped to most bike frames.
The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs.
The TPT-1 is a handy carry-along tool for repairing small punctures and cuts in tubeless bicycle tires without removing the tire from the rim, getting you back on the trail in no time. The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size, allowing the tubeless sealant to do its job and reestablish a seal. The unique sliding plug retainer holds the plug in place and prevents it from being pulled back out as the tool is removed. Everything is stored in a compact package that fits easily in a saddlebag or backpack pocket.
MTB-5
Includes the following:
- 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches
- T25 Torx-compatible driver
- Philips #2 cross tip & flat head screwdrivers
- Chain tool (5 to 12 speed compatible)*
- Spoke wrenches (equivalent to SW-0 and SW-2)
- Presta valve core removal tool
- Disc brake rotor truing tool
- Disc brake pad spreader
*The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets
- Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm)
- Weight: 6.9 oz. (195 g)
- Replaceable chain tool pin (Part #985-1)
TPT-1
- Includes 5 vulcanized rubber plugs (refills available - part #2370K)
- Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6")
- Weight: 79 grams (2.8 oz.) with plugs
NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.
$78.95
Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately).
The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs.
For thru axle hubs greater than 135 (142, 150, 157, etc.) in the TS-2.2, use the TS-2TA Thru Axle Adaptors (sold separately).
$76.95
Park's Tire Seating Tool is designed to quickly seat the bead on stubborn tires. During inflation some tire beads can slip below the rim edge and become difficult to pull out and align. The PTS-1 comes to the rescue with its non-slip jaws and vinyl-coated handles that provide plenty of leverage for pulling out the tire. Plus, it's adjustable to fit various tire widths.
$74.95
Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4T was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material.
- Bench Top Mount sits firmly on any flat surface
- Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters
- Generic slots and holders to hold a wide variety of tools and small parts
- Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately)
- Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)
$72.95
"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings:
• Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose
• Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS
• Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm
• Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire
• Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes
Also included:
• Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing
• Guide magnet — routes guide cables through the frame from the outside"
$71.95
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
$70.95
The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool.
- Range: 150 mm | 6"
- Resolution: 0.01 mm | 0.0005"
- Accuracy: +/- 0.02 mm | 0.001"
- Repeatability: +/- 0.01 mm | 0.0005"
- Measures external, internal, depth, and stepped dimensions
- Uses LR44 batteries
$65.95
Securely holds any of Park's TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.
$65.95
Securely holds the TS-4.2 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.
$59.95
The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.
$59.95
Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles.
Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels.
* Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.
$59.95
Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides your saw blade. And, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4-inches.
$57.95
Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless forks. Slide on the guide, clamp it down and the hardened-steel cutting slot ensures a perfect cut every time. You can remove as little as 1mm, too.
$56.95
Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).
$55.95
Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. They're sold as a set of right and left hand threads. Made of high carbon steel, precision ground, and hardened to stay sharp, they cut easily and fit all conventional tap handles.
• Includes a set of 2 taps, 9/16" x 20 tpi
• Made of high carbon steel, precision ground, and hardened to stay sharp
• Fits all conventional tap handles
The tap drill size for a 9/16-inch x 20 tpi thread is nominally 33/64-inch.
$54.95
The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps.
- Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles
- Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions
- Usable extension length of 18" to 32" (45cm to 81cm)
- Collapses and folds to 17" (43cm) for storage
$52.95
Park's Oversize Adjustable Saw Guide guides a hacksaw so that you can accurately cut fork steerers, airfoil-shaped seatposts and more. The guide is made to be held in a vise and it has hardened-steel cutting slots and a secure clamp for the part you're cutting so that you make a perfect cut every time. The guide is compatible with round tubes from 1 to 1-3/4 inches in diameter and airfoil shaped parts up to 3.5 inches long. There are slots for standard and carbon-specific saw blades.
$50.95
Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.
$49.99
The RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup.
• Designed for the 1-1/4 inch and 1-1/2 inch headest standards
• Also easily removes cups on one-piece cranks
• Strong, heat-treated alloy steel with a nickel finish
SHIS Terminology: The RT-2 will remove cups of ZS44, ZS49, ZS55, ZS56, EC49 and EC56 headsets.