Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Once you find the part you need, order it for shop pick up and call the service department to set up installation.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Bontrager's Race bar is crafted from custom-butted 2014-T6 aluminum for great strength, stiffness, and light weight. The shot-peened finish increases the fatigue life and adds a great look.
On Sale
Brooks' Perforated Leather Tape adds world-class comfort and style to your prized bicycle. This supple, full-grain leather bar wrap provides fantastic grip and vibration damping. Plus, the included cork bar-end plugs provide a unique and classy finishing touch.
Experience the best in bar tape, DSP has excellent durability, increased shock absorption, and great feel in any condition. 2.5 mm thick for that extra bit of comfort. At 82” there is ample length for any bar and only 50 grams per set, including the plugs, makes it the lightest tape on the market.
Experience the best in bar tape, DSP has excellent durability, increased shock absorption, and great feel in any condition. 2.5 mm thick for that extra bit of comfort. At 82” there is ample length for any bar and only 50 grams per set, including the plugs, makes it the lightest tape on the market
Experience the best in bar tape, DSP has excellent durability, increased shock absorption, and great feel in any condition. 2.5 mm thick for that extra bit of comfort. At 82” there is ample length for any bar and only 50 grams per set, including the plugs, makes it the lightest tape on the market.
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
- Aheadset preload adjusting bolt
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.52
KS Dropper Post Service Parts
$2.52
Saddle clamp heads and lowers for KS Dropper posts.
$2.99
Bar end plugs (2)
$3.00
BB30 Spacer - 15.46mm
$3.26
KS Dropper Post Service Parts
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.50 - $3.99
The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length
$3.57
Complete remotes and remote components for KS dropper posts.
$3.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$4.20
KS Dropper Post Service Parts
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
$4.62
Saddle clamp heads and lowers for KS Dropper posts.
$4.62
KS Dropper Post Service Parts
$4.95
Small parts for Wolf Tooth ReMote.
$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
$4.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
$5.00
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
$5.00
Alternator 1.0 Set Screws
$5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
$5.00
CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock
$5.00
CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock
$5.25
Saddle clamp heads and lowers for KS Dropper posts.
$5.25 - $8.19
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.25
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$5.78
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.99
Odyssey A Brake shoes for all your braking needs.
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$6.00 - $21.00
Flat Mount Disc Caliper Bracket Bolts
$6.00
SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish "Make the Leap" frog logo.
$6.00
SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish S logo.
$6.00
M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline
$6.00
Customize your ride with SRAM bar end plugs.
$6.00
- Front or rear brake - MTB specific - 1.5mm stainless cable
$6.00
Stainless steel cables are extruded to provide a smooth, low-friction surface.
$6.00 - $7.00
- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
$6.93
KS Dropper Post Service Parts
Page 1 of 25 Next page