Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Brakes/Levers/Pads
$41.44
- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.
$45.70
8 Series Disc Brake Pads
- Disconnected two piece back plate
- Performance compound offers excellent bite for strong braking response in a variety of conditions
- Set of four disc brake pads for one MT5, MT7 Caliper
$46.20 - $46.39
Shiftmix adaptors allow a shifter to clamp directly to a Magura brake lever, expanding setup possibilities.
$49.67
7 Series Disc Brake Pads
- Race compound offers maximum stopping power for those who push their materials to the limits
$50.40
Magura Storm SL.2 Rotor - 6-bolt silver
The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.
$54.88
Magura mdr-c ebike disc rotor - 203mm center lock w/ lock ring for quick release axle silver
The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability.
- Optimized for eBike use
- Prepared for tone wheel or magnet
- Wear optimized ring design
- Equipped with a center lock mount for corresponding hubs
- Center Lock with lockring for quick-release-axle (internal tool intervention)
$54.88
Magura mdr-c ebike disc rotor - 203mm center lock w/ lock ring for thru axle silver
The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability.
- Optimized for eBike use
- Prepared for tone wheel or magnet
- Wear optimized ring design
- Equipped with a center lock mount for corresponding hubs
- Center Lock with lockring for thru axle (tool opening engagement)
$59.59
8 Series Disc Brake Pads
- Disconnected two piece back plate
- Race compound offers maximum stopping power for those who push their materials to the limits
- Set of four disc brake pads for one MT5, MT7 Caliper
$74.47
Magura MT Sport Disc Brake Caliper black
- 0-degree tube connector
- Includes brake pads
$75.90
Magura Storm Rohloff Disc Rotor - 4-bolt silver
- The Magura Storm disc rotor is designed for use with Rohloff Speedhubs.
- Designed to offer exceptional cooling
- Low noise
- 2mm rotor thickness
$84.00
- Special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads
- In addition, maximum heat resistance and stability
- E-Bike optimized
- 6 steel mounting screws included
$89.37
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$90.91
Magura sleeve nut - for ebike use pack of 10
- Small parts used to install hydraulic hose for Magura disc brakes.
$97.84
Magura MT eSTOP disc brake calipers
- MagnetiXchange pistons for easy brake pad replacement
- Rotatable tube connection
- Includes brake pads
$99.00
The Magura MDR-P is a disc rotor for performance-oriented riders and tough tasks ranging from downhill and ebikes to heavy cargo bikes. It features Dovetail Interlink technology, a patented interlocking of the outer and inner rings. This provides additional support for the inner ring if the outer ring expands due to heat. In contrast to floating discs, the torque is transmitted to the dovetail-shaped toothing over its entire surface instead of just the rivets, increasing the rigidity of the brake disc and the degree of heat dissipation under continuous load. The MDR-P is the most powerful brake disc in the Magura portfolio, yet it still offers riders low weight and reduced vibration.
- Perfect for demanding applications such as ebike or downhill riding
- Two-piece design offers the highest level of heat dissipation and high torque transfer
- Wear optimized ring design
- Prepared for tone wheel or magnet
$111.73
- Complete caliper replacement for Magura systems (no caliper pistons or seals available, must replace caliper). Includes brake pads
- 74mm post-mount replacement calipers: if replacing IS-51mm caliper, please use separate adapter for refitment to original application
$119.00
Magura mt thirty disc brake and lever - front or rear hydraulic post mount black
- Carbotecture radial master
- Flip-flop, easy bleed design
- Carbotecture lever-blade and handlebar clamp
- 4-piston forged monobloc caliper
- Adjustable reach
- Adjustable banjo fitting
$137.95
Replacement lever blades for Magura disc brakes
$139.00
The MT4 is a 2-piston brake appropriate for XC or multi-use riding.
- Aluminum lever blade
- Carbotechture master cylinder
- Flip-flop lever design works on right or left side with either brake
- 3mm allen actuated reach adjust
- Royal Blood mineral oil
- MagnetiXchange system allows easy pad changes
- Designed for use with 2.0mm thick Magura rotors
- 5 year leakproof warranty with proof of purchase
$148.50
Magura hs22 linear pull brake and lever - front or rear 3-finger lever blade easy mount black
The Magura HS22 hydraulic rim brake and lever is designed for the needs of city and trekking riders. Its features include a high level of safety and maintenance-free operation.
- The robust Carbotecture brake master lowers the total weight of the brake without compromising on durability
- Tool-free resetting in the event of pad wear and the closed hydraulic system of the proven HS technology make the HS22 a totally care-free brake
- The hydraulic system is "care-free" with the use of Magura's Royal Blood mineral oil
- Tool-free reach adjust
$149.00
Magura mt4 estop disc brake and lever - front or rear hydraulic post mount black
The Magura MT4 eSTOP disc brake is optimized for the requirements of modern e-bikes. it offers controlled power for both off-road and city tours, and is particularly reliable thanks to optimized components.
- The eSTOP system is based on Magura's MT design
- The MT4 is proof that versatility and outstanding performance for E-Bikes don’t have to be expensive
- 2-finger aluminum lever blade is durable and light weight
- Can be mounted on either the left or the right
- When combined with Magura MDR-C or MDR-P rotors, the MT5 eSTOP offers even higher braking power and stability
- Magura Sport brake pads included
$159.00
The Magura CT4 hydraulic 2-Piston disc brake provides braking power with ease of use and low maintenance for city and trekking use.
- Transmission ratio and ergonomic features are matched to the requirements of urban and all-road biking
- 3-Finger Carbotecture brake lever and blade with tool-less reach adjustment
- Axial master cylinder features an enlarged expansion reservoir that reduces the risk of air being trapped in the system and ensures reliable long-term operation
- 2-Piston caliper features Quiet SPORT brake pads with short bed-in period
- Optimized for eBike use
- EBT "Easy Bleed Technology" feature
$159.00
No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance.
- An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance
- Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium
- Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir
- Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement
- Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty
- Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual
$169.40
Magura hs11 linear pull brake and lever - front or rear 4-finger lever black
- The Magura HS11 hydraulic rim brake and lever features an uncomplicated design, well-suited for trekking or city riding.
- The HS11's enormous braking power and precise modulation ensure maximum safety in the urban jungle
- The 4-finger aluminum lever blade is ergonomically optimized for a unique braking feel
- The hydraulic system is "care-free" with the use of Magura's Royal Blood mineral oil
$179.00
- Class adapted for use on eBike's, motorcycle racing's proven 4-piston technology creates an absolute maximum of braking force.
- Motor cut off
- HIGO Closer
- For E-Bikes up to 45 km/h
- Position: Front or Rear
- Hydraulic Hose Length: 2200mm
- Fluid: Mineral oil
- Lever Blade Material: Aluminum
$189.00
The Magura MT5 HC Disc Brake and Lever set offers excellent braking performance at an unbeatable pricepoint.
- The 4-piston brake caliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation
- Flip-flop lever design works on right or left side with either brake
- 1-finger lever blade
$190.52
The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo!
- The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade
- Full hydraulic rim brake system: closed design (no reservoir)
- Mounts to cantilever/linear brake post studs (fork and/or frame)
- Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust
- All hose fittings perfectly hidden with new designed caps
- Compatible with all trigger and twist grip shifters
- Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty
- Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)
$269.00
- Clearly defined bite point and maximum power make it the first choice for gravity and high-speed pilots
- 1-finger HC lever blade modulates the enormous braking power as desired
- Suitable for mounting left or right
$309.00
- 4 front pistons for maximum braking power, 2 rear pistons for perfect modulation
- Short HC lever mean that it can reliably deliver full braking power at the touch of just one finger.
- Position: Front and Rear
- Hydraulic Hose Length: 2200mm
- Fluid: Mineral oil
- Lever Blade Material: Aluminum
$319.00
- Super light due to the Carbotecture SL housing
- High braking power thanks to the new ergonomic 1-finger HC Carbon lever blade
- Suitable for mounting left or right
- Reach Adjust: 3mm allen key
$319.00
- Super light due to the Carbotecture SL housing
- High braking power thanks to the new ergonomic 1-finger HC Carbon lever blade
- Suitable for mounting left or right
- Reach Adjust: 3 mm allen key
$659.00
- 4 pistons in the front for maximum braking power
- 2 pistons in the rear for perfect modulation
- Thanks to the new 1-finger HC Carbon lever blade it just weighs about 230g (average value)
- Suitable for mounting left or right
- Position: Front and Rear
- Hydraulic Hose Length: 2200mm
- Fluid: Mineral oil
$59.99
This individual left Microshift ADVENT brake only drop bar lever matches other externally-routed microSHIFT drop bar shifters for a clean aesthetic.
$22.50
The Monolever features smooth edges and a clean look.
- Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
- Replaceable hardware to eliminate stripping
$133.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems
- Compatible with drop bar levers and short pull mountain bike levers
- Sealed pivot system with adjustable spring tension and Kool Stop pads
- Recommended for standard pull (not linear pull) brake levers
- Made in USA
$180.00
- Mini-v brake for use with standard short pull (road) brake levers
- Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile
- Short curved arms give plenty of clearance for cyclocross tires or wide fenders
- Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength
- Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel
- Made in USA
$188.50
- Reversible 6061 aluminum arms for left or right cable routing
- Quick-release noodle is lined with Teflon for smooth action
- High tension square wire springs
- Thinline threaded pads with easy-to-adjust arm hardware
- Made in USA
$244.50
We think this is the best mechanical disc brake on the market, machined by us here in Chico, California.
Flat-Mount Klampers are available in Short-Pull (SRAM/Shimano) or Campagnolo Pull.
TECHNICAL INFORMATION
Compatibility: All Flat-Mount Bicycles
Material: 6061 Aluminum, Heat Treated 12L14 Steel
Weight: 211g
Brake Pads: Kool Stop Disc Brake Pads
$244.50
A mechanical, cable operated disc brake caliper from Paul Components!
Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations.
- Meaty stiff calipers give a good response and great feel
- Extra-large three ball system running on hardened steel actuators for more smoothness and less wear
- Needle bearing thrust washer reduces friction
- Sold as caliper only (rotor & adapter must be purchased separately)
TECHNICAL INFORMATION:
Compatibility: IS/Post Mount
Cable pull: Long-Pull for SRAM/Shimano Mtn
Material: 6061 Aluminum, Heat Treated 12L14 Steel
Weight: 211g
Brake Pads: Kool Stop Sintered
$244.50
A mechanical, cable operated disc brake caliper from Paul Components!
Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations.
- Meaty stiff calipers give a good response and great feel
- Extra-large three ball system running on hardened steel actuators for more smoothness and less wear
- Needle bearing thrust washer reduces friction
- Sold as caliper only (rotor & adapter must be purchased separately)
TECHNICAL INFORMATION:
Compatibility: IS/Post Mount
Cable pull: Short-Pull for SRAM/Shimano Road
Material: 6061 Aluminum, Heat Treated 12L14 Steel
Weight: 211g
Brake Pads: Kool Stop Sintered
$12.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
- Qwik-Adjust Barrel Adjuster
- Bend Zone
- All weights per pair
- All levers are compatible with mechanical disc brakes and linear-pull brakes
$19.00
SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
$25.00 - $33.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader
$27.00
Original equipment pads for no-compromise disc brake performance.
- Steel backed organic pad is quiet
- Each pad kit includes two pads, a pad spreader spring, guide pin and clip
- For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road
$27.00
Original equipment pads for no-compromise disc brake performance.
- Pad Shape Number: 37
$27.00 - $33.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
$30.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
- Qwik-Adjust Barrel Adjuster
- Bend Zone
- All weights per pair
- All levers are compatible with mechanical disc brakes and linear-pull brakes
$32.00
SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.
$34.00
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear pull or mechanical disc brakes. They are super easy to install and adjust-so you can dial in the modulation just the way you like.
- All levers are compatible with mechanical disc brakes and linear-pull brakes.
- Reversible
- Reach Adjust and Speed Dial Leverage Adjust
$39.99
SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
$42.00
With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.
$43.00 - $54.00
The G2 CleanSweep design helps keep dirt and grime from mucking up your ride.
- Ideal complement for the BB disc brakes.
$43.00 - $54.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance.
- Designed for road use
- Paceline brake track offers quiet brake operation
$47.00 - $59.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$47.00 - $53.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline
$53.00 - $69.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management
$53.00 - $63.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management
- Hub Compatibility: Center Lock
- Disc Material: Steel
$59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Compatible with both road and mountain bike brakes
- Includes steel rotor bolts
$61.00
When you choose to ride, advancement means having a group that’s always ready. Apex 1 is that group. As a left lever for your Apex 1 setup, or paired for single speed adventures, the Apex mechanical brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer.
- ErgoFit design from SRAM RED improves grip and finger wrap
- Reach Adjust for a perfect fit
- Durable, forged aluminum lever blade with laser texture for a positive touch