Skip to main content

Village Cycle Remains OPEN

Save on All Road Bikes

Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebars

Once you find the handlebar you need, order it for shop pick up and call the service department to set up installation.

Whisky Parts Co. No. 7 12F Drop Bar
$75.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 7 24f Drop Bar
$75.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky Parts Co. No.7 6F Alloy Drop Bar
$75.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
Whisky Parts Co. No. 9 Flat Bar
$140.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No. 9 Riser Bar
$140.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No.9 Carbon Rise Handlebar
$150.00
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Rise Handlebar. - 5 Degree Upsweep - 9 Degree Backsweep - Trimmable ends - Matte UD full carbon construction - 258 grams
Whisky Parts Co. No.9 Mountain Carbon Handlebar 35.0
$159.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
Whisky Parts Co. No. 9 12f Drop Bar
$215.00
Whisky's No.9 12f is their most versatile carbon drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 9 24f Drop Bar
$215.00
Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Velo Orange Belleville Handlebar
$35.00
The Belleville is Velo Orange's reproduction of what is probably the most popular style of French city and utility bike bar ever. Anyone who enjoys classic European films has seen bars like this dozens of times. The Belleville is 430mm wide (or 450mm outside-to outside) and has zero rise. That's fairly narrow for a city bar, which is an advantage in traffic. Reach is about 180mm; the straight grip section is a generous 150mm. It has a 25.4mm clamp area and is rendered in aluminum alloy. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard inverse shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange Milan Handlebar
$35.00
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Velo Orange Porteur Handlebar
$35.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange Far Bar Handlebar
$55.00
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round
Spank Spoon Bar
$35.90
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
Spank Spike 800 Race Bar
$79.90
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
Spank Spike 777 FR Bearclaw Bar
$99.00
- Freeride handlebar, developed with Darren “Bearclaw” Berrecloth - Unprecedented stiffness and durability at an exceptionally low weight. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 747mm - KEY TECHNOLOGIES: Dual XGT, CNC Bending, Impact Ends, MGR - MATERIAL: MGR 2 series alloy - WEIGHT (g): ±340 (15mm) / ±350 (30mm) / ±390 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 777 (Adjustable to 747) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
Spank Oozy 35 Bar
$99.90
- Lightweight 780mm wide handlebar for Trail or All Mountain riding - Big and burly 35mm barclamp - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g - Diameter (mm): 35 - Rise (mm): 25 - Length (mm): 780 (adjustable to 740) - Geometry (deg°): 5° up x 8° back - Finish: Shot peen anodized
Spank Spike 800 Vibrocore Bar
$99.90
- DH Race tuned award winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - MATERIAL: MGR Super 6 Alloy - WEIGHT (g): ±340 (15mm) / ± 350 (30mm) / ±360 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 800 (adjustable to 740) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
Spank Oozy Trail 780 Vibrocore Bar
$109.00
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
Spank Spike 35 Vibrocore Bar
$109.00
- DH and Freeride, ultra-wide, 820 length handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper(105mm) design - MATERIAL: Zirconium Doped 7-Series Alloy - WEIGHT (g): ±300 - DIAMETER (mm): 35 - RISE (mm): 25 - LENGTH (mm): 820 - GEOMETRY (deg°): 5° up x 8° back - FINISH: Shot peen anodized, decal logos
Spank Spank Flare 25 Vibrocore Drop Bar
$109.90
- 25° aggressively flared, wide drop bar for true off-road performance and comfort - Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength. - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 31.8mm barclamp extends through the top section providing enhanced hand support and comfort without multiple wraps of tape to increase diameter. - Round profile upper section facilitates wide range of rider/hand positions and maximizes grip on the bars in rough terrain - 21.6mm inner diameter barends allow use of most barend shifters - MATERIAL: Zirconium Doped 7-Series Alloy - WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm - WIDTH BAREND TO BAREND (o-o): 562 / 582 / 602mm - WEIGHT (g): 345 / 350 / 355 - DROP / REACH: 110mm / 65mm (all sizes) - BARCLAMP / TOP SECTION: 31.8mm Round Profile - FLARE: 25° - RAMP: 14°
Spank Spank Wing 12 Vibrocore Drop Bar
$109.90
- 12° moderately flared, medium width drop bar balances off-road performance, with on-road aerodynamics and comfort - Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding stance and long days in the saddle on mixed terrain - 31.8mm bar clamp zone, and aerodynamic ergo top section enhances hand comfort over longer rides, without limiting range of rider/hand positions - 21.6mm inner diameter barends, allow use of most barend shifters - KEY TECHNOLOGIES: Vibrocore, On-Off Road Geometry - MATERIAL: Zirconium Doped 7-Series Alloy - WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm - WIDTH BAREND to BAREND (o-o): 498 / 518 / 538mm - WEIGHT: 355 / 360 / 365g - DROP / REACH: 10mm / 65mm (all sizes) - BAR CLAMP / TOP SECTION: 31.8mm Ergo Profile - FLARE: 12° - RAMP: 14°
Salsa Rustler Handlebar
$39.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends
Salsa Salt Flat Handlebar
$39.00
Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 353g - Note: Salt Flat bars are not compatible with bar ends
Salsa Cowbell
$50.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)
Salsa Cowchipper
$50.00
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)
Salsa Woodchipper
$50.00
Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 6061-T6 aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 357g (44cm)
Salsa Salt Flat Deluxe Handlebar
$65.00
Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 321g - Note: Salt Flat bars are not compatible with bar ends
Salsa Rustler Deluxe Handlebar
$69.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends
Salsa Bend Bar Deluxe Handlebar
$75.00
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23-deg sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong, and durable, and great for long days bikepacking, touring, or shredding singletrack. - Constructed using double-butted, AL-7050-T76 aluminum - Bar sweeps forward, then back, to preserve stem length - 5-deg upsweep allows adjustment to suit personal preference - Bar can be flip-flopped to run up or down - Graduated ends for easy trimming - Bead-blast black finish
Page 1 of 4 Next page