Wheels

- Grade 3 balls and magnetite rust proof finish - Abec 5 precision and silicone w seals - 3 times cryogenic race treatment - Bearings sold individually, not as pair

Crew 20-inch Front Hub/Brake Compatibility: Rim Brake Color: Black Wheel Size: 20" ISO Diameter: 406 / 20" BMX Valve: Schrader Defined Color: Black Front Axle: 3/8" x 100mm Tire Type: Clincher

Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

The AG28 combines a small diameter rim with high-volume tires — the perfect platform for good times. - Lifetime Incident Protection and 5 Year Manufacturer Warranty - Handmade in Ogden, Utah - Intended Use: Gravel, Bikepacking - Inner Rim Width: 28mm - Wide Hookless Bead Anti-Pinch Flat Technology - Recommended Tire Size: 45-57mm (2.25?) Tubeless Optimized; Tube Compatible

The G27 is the ultimate gravel component, capable of transforming any drop bar bike into an off-road capable rig, made for multi-day bikepacking routes, singletrack adventures, and everything in between. Riders on rough and loose terrain, who primarily ride dirt, often find more confidence and control from a larger volume tire with 650b rim. Those who prioritize traction and stable control over flat out speed will appreciate the G27. - Full carbon rim features wide hookless beads that provide a 60% improvement in pinch flat resistance, while maintaining the ability to run lower tire pressures and improve traction and rolling resistance - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 27mm internal rim width supports 42c -2.25" tires

When pushing the highest speeds in time trial and triathlon racing, the SES 7.8 will provide you an unmistakable aero advantage. The outright fastest wheelset in ENVE’s line is well proven in the world’s biggest races. The SES 7.8 features asymmetric rim geometries with the rear rim at 80mm deep and 27.5 mm wide, designed to improve the efficiency of the airflow in the system of bike frame and wheels when paired together. - Full carbon rim is optimized for improved aerodynamics, and provide better tubeless performance - Tubeless compatible design allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 78mm rear depth and 19mm internal rim width supports an Aero Optimized design around 25mm tires - Rims are pre-taped and tubeless ready

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. There’s no better option for the uncompromising climber who values performance up and down the mountain than the new SES 2.3. At sub-1200 grams, they’re in a league of their own and deliver a real-world advantage in hilly terrain through their lightweight design and confidence-inspiring handling. - Full carbon rim features continuously running fibers throughout the rim, tapering laminates, and removing excess material, the SES 2.3 achieves an impressive feat in weight reduction and composites engineering. Additionally, layering fibers in specific orientations achieves zone-specific performance requirements like impact toughness, stiffness, and tire retention - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel

As the most versatile wheel in the line, the SES 3.4 is the go-to for just about any terrain or surface conditions. The high-volume design of the rim and Wide Hookless Bead technology not only makes the SES 3.4 a modern road wheel that is raced at the World Tour level, but it’s also a favorite for mixed surface events due to its feature benefits that clearly separate it from other wheels in the same depth category. Pinch-flat resistance, low weight, and an aero profile optimized around high-volume tires are key features of the SES 3.4, making it the most adept all-around wheel. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 42mm rear depth and 25mm internal rim width supports minimum tire sizes of 27mm, with an Aero Optimized design around 29mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready

Built by hand, including stainless steel spokes, rim tape and black nipples ready to roll.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Grade 10 chromium steel balls MR17287LLB - 17 x 28 x 7mm 6808LLB - 30 x 42 x 7mm

Racing 6 has been designed as a simple, reliable and up-to-date racing wheel. An ideal package for those seeking a smart solution that's in line with all the latest trends but with that little added plus. It's a Fulcrum wheel, it's a training wheel, it's the right aluminium wheel for those who are becoming acquainted with the world of racing bicycles and are attentive to details. - Preinstalled tubeless tape - Straight pull hubs - Centerlock hub

Fulcrum hits the dirt with new Rapid Red 5 disc brake gravel wheels. - 2 Way Fit Ready - Tubeless Ready - 2:1 Spoke Ratio for improved torque balacing - Asymetric rim for improve performances and handling - Straight pull spokes for performance and durability consistency - Included DRP protection for longer bearing lifespan - Factory installed tubeless tape

Designed with the goal of balancing performance and comfort, the Wind 57 guarantees fluid handling and versatility. These wheels are not solely for road use, as they can also handle light off-road riding too (ASTM category 2), so your ride can extend beyond traffic-congested roads. The Wind 57 inherits many of Fulcrum’s proprietary technologies, to offer a superior ride feel compared to the previous generation. Handling and reactivity characteristics have been improved to make these versatile and comfortable wheels perfect for the modern cyclists. - Wind rims are higher and wider than the previous generation. At the same time the overall weight has been reduced, thanks to the new mix of carbon fibers and their layup inside the mould - Rim height has been raised to 57 mm respectively, with an inner rim channel of 23 mm to accommodate larger tires - Patented DRSC (Directional Rim-Spoke Coupling) system is used in the construction of the rim to provide greater stiffness and durability of the wheel - The no-holes MOMAG assembly technology allows for a 2-WAY FITT tubeless rim, without the need for tubeless rim tape and the presence of the traditional hook ensures the maximum compatibility will all tube-type and tubeless tires on the market and the maximum safety for riders - Build with stainless steel butted spokes, with self-locking aluminum nipples and laced with the Two-to-One system to increase wheel strength - Forged alloy hubs with sealed bearings to minimise wear and guarantee exceptional smoothness - The ratchet system of the freewheel has been reinforced and increased in size to provide 36 points of engagement - Redesigned graphics and visible technical information

Designed with the goal of balancing performance and comfort, the Wind 57 guarantees fluid handling and versatility. These wheels are not solely for road use, as they can also handle light off-road riding too (ASTM category 2), so your ride can extend beyond traffic-congested roads. The Wind 57 inherits many of Fulcrum’s proprietary technologies, to offer a superior ride feel compared to the previous generation. Handling and reactivity characteristics have been improved to make these versatile and comfortable wheels perfect for the modern cyclists. - Wind rims are higher and wider than the previous generation. At the same time the overall weight has been reduced, thanks to the new mix of carbon fibers and their layup inside the mould - Rim height has been raised to 57 mm respectively, with an inner rim channel of 23 mm to accommodate larger tires - Patented DRSC (Directional Rim-Spoke Coupling) system is used in the construction of the rim to provide greater stiffness and durability of the wheel - The no-holes MOMAG assembly technology allows for a 2-WAY FITT tubeless rim, without the need for tubeless rim tape and the presence of the traditional hook ensures the maximum compatibility will all tube-type and tubeless tires on the market and the maximum safety for riders - Build with stainless steel butted spokes, with self-locking aluminum nipples and laced with the Two-to-One system to increase wheel strength - Forged alloy hubs with sealed bearings to minimise wear and guarantee exceptional smoothness - Redesigned graphics and visible technical information

HED's entire line of Big Deal fat rims can now be purchased as a rim-only for the custom build of your dreams. Our demanding, discerning, and fat-loving customers have spoken: They love our Big Deal carbon rims. Nothing else offers the same combination of easy tubeless setup, stiffness, and jaw-dropping weight savings. They're utterly fat-tastic. In an effort to bring the advantages of Big Deal technology to an even wider audience, our engineers worked hard to apply the same principles to an aluminum platform. Enter: the Big Aluminum Deal and Big Half Aluminum Deal. At 80mm wide, these rims offer superb fit with all common fat bike tire sizes. They have the same patented Inflatobam tubeless technology as their carbon brethren - saving over a pound in inner tubes alone. What's the difference between the B.A.D. and the B.H.A.D.? Only the rim diameter. The B.A.D. has a 26" diameter, while the B.H.A.D. is made for larger 27.5" fat bike tires. Additional Info - Rim Type: Tubeless-Ready Clincher - Rim Width: 80mm - Rim Material: 6061 Aluminum - Rim Weight: 695g - Color: Black - Rim Hole Count: 32 - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Drill Pattern: Symmetrical Only - Decal Type: Shadow - Rim ERD: 586 (27.5"), 562mm (26"), 510mm (24")

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Versatility is the name of the game with the Industry Nine AR25. AR25 is intended to be used on all road surfaces - tarmac to gravel. Every road on the map is fair game when you’re riding AR25. - Torch 3-pawl freehub body offers low drag and reliable 6 degree engagement - High quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile

The Classic Enduro S is designed for demanding trails to all mountain adventures, providing lightning-fast propulsion courtesy of the Hydra Classic hubs laced to the terrain-taming Enduro S alloy rim. The combination of materials creates a wheelset that's ready for charging those technical trails, making these the perfect upgrade for any mountain bike built to attack demanding terrain with long descents. - Enduro S Alloy rims with 30.5mm inner width and 28 spokes - 6-Pawl Hydra Freehub Body features 690 engagement points at every .52 degrees, yeilding telepathic control - Traditional and conventional flanged hubshell packed with i9 tech, while using a standard j-bend spoke and nipple - Accommodates tire widths 2.3-2.8"

The Industry Nine TR280 wheelset was conceived as a gravity-capable wheelset on a diet. The TR280 mounted to the Hydra system chassis is adept at nimble maneuvering and perfect long days in the saddle thanks to the added compliance offered by the lower spoke count. - Straight pull, integrated nipple, one-piece aluminum spokes - 220lbs/100kg max rider weight

Industry Nine’s most well-rounded, adventure-ready wheelset gives the rider high-tech features and a ride quality that only the Solix G hub and spoke system can offer. At the heart of Solix G UL250a wheels is the lightning-fast Solix drive mechanism that translates crank movement to instant propulsion. With 605 points of engagement, you’ll feel connected to the terrain and be able to provide pedal input immediately to command your ride over nearly any road surface from smooth fire roads to washboarded and bouldered jeep roads and everything in between. This confidence is only bolstered by the Solix G chassis - an Industry Nine exclusive reimagining of the hub and the spoke interface. Laced directly into the Solix hub flange are 24 machined straight-pull aluminum spokes that thread right into the hub shell. - 5-Pawl Solix freehub body with 605 points of engagement. This patent-protected freehub technology offers unrivaled .59° engagement for the Solix family of wheels - The UL250 aluminum rim is built for tubeless gravel and MTB tires up to 55mm or 2.1”, features a hooked bead and a barbed bead shelf that keeps tires right where they should be - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - Combining the immediate response of the Solix freehub with this evolutionary hub and spoke chassis gives the rider a system that can challenge carbon rim wheelsets for ride quality and durability - 2-Year Warranty coverage against defects

The Enduro 300 wheelset features an aluminum triple-cavity rim featuring a Hollow Bead Wall designed to shrug off impacts and make pinch flats a distant memory. The wide, hollow structure contributes additional surface area to reduce the risk of tire pinch and increases strength due to the bracing provided by the additional wall. What does this mean for your ride? It encourages riders to charge terrain with maximum confidence and minimal worry thanks to the Hollow Bead Wall concept. Paired with a 32 spoke system chassis propelled by the Hydra hub's near instant .52° engagement, riders will revel in unrivaled control in the tech with an open invitation to put the power down at any moment. When the dust settles, Enduro 300 wheelset emerges as a true best in class contender for aggressive riders. - High quality aluminum alloy rim with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay - Versatile, strong and stiff 32h Mountain System chassis forms the foundation for the most capable wheelset - 690 P.O.E. Hydra 6-pawl freehub body engages every .52 degrees, yielding telepathic control - Hollow Bead Wall promotes increased pinch flat protection and impact resistance - Approved for use on Class 1 E-Bikes - 2-Year Warranty

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.