Wheels

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA 7075 T6 Aluminum

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 50w 27.5+ rims

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

Whether it’s 'cross, road, or mountain, nothing makes your bike feel faster than a good set of wheels. The Whisky No.9 carbon rims are performance-driven designs that offer excellent durability and features to create a torsionally stiffer rim, compared to single wall carbon offerings. Available in multiple sizes and widths, Whisky’s rims have you covered no matter what or where you ride. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm

Ultra-light, bolt-on thru-axles, with a low-profile 6mm head for use on Whisky forks and others. They are also available in some common rear frame sizes. See manufacturer's specifications for fitment questions. - Thread Length: 12mm

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

When the next step in freecoaster design is combined with the future of aftermarket rim design, the result is a wheel that cannot be surpassed. The Optimized freecoaster rear wheel is designed around modern-day street riding; this combination of game changers will leave any rider confident that they made the right choice. - Shadow Truss Rim - Shadow Straight 14 gauge stainless steel spokes with 3 cross pattern - Shadow Optimized Freecoaster Hub - Proprietary plastic non drive side hub guard - Left side and Right side drive configurations

The Symbol front wheel pairs the amazing Shadow Symbol front hub with the impressive Shadow Truss rim to create an unmatched combination. A set it and forget option for those who seek quality, value, and strength in a complete front wheel. Summed up in one word…. Integrity. - Shadow Truss Rim - Shadow Straight 14 gauge stainless steel spokes in a 3 cross pattern - Shadow Symbol Front Hub - 2 Proprietary Plastic non drive side hub guards

The Symbol Cassette wheel pairs the value and reliability of the Shadow Symbol cassette hub with the rigidity and strength of the Shadow Truss rim to create an unbeatable combination. Including a replaceable plastic non drive side hub guard and laced 3 cross to the wider, 38mm Truss rim, this wheel is ready for action without any extra consideration. - Shadow Truss Rim - Shadow Straight 14 gauge stainless steel spokes, in a 3 cross pattern - Shadow Optimized Freecoaster Hub - Proprietary plastic non drive side hub guard - Left side and Right side drive configurations

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip

Rampage Pro front wheel features a low flange aluminum hub shell with precision sealed bearings, female axle and 3/8" chromoly bolts. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Low flange aluminum hub shell with Heat-treated chromoly female axle (3/8") - CNC alloy cones and Sealed, 6000 bearings - Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H

The Rampage Pro rear wheel features an aluminum hub shell with precision sealed bearings, 9 tooth driver and 14mm heat-treated chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Aluminum hub shell with Heat-treated chromoly axle - CNC alloy cones and Sealed bearings - 1-piece chromoly (9T) driver -Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H - Two Thermalite Drive and Non-drive Hub Guards Included - Cassette style hub and Clutch-style freecoaster hub options - Left-hand and Right-hand drive configurations

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings - 9t Chromoly driver w/ 3-pawl system

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- Kits include one pair of end caps - Instructions and hub axle determinations are available online @ www.notubes.com

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed