Wheels

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

The G27 is the ultimate gravel component, capable of transforming any drop bar bike into an off-road capable rig, made for multi-day bikepacking routes, singletrack adventures, and everything in between. Riders on rough and loose terrain, who primarily ride dirt, often find more confidence and control from a larger volume tire with 650b rim. Those who prioritize traction and stable control over flat out speed will appreciate the G27. - Full carbon rim features wide hookless beads that provide a 60% improvement in pinch flat resistance, while maintaining the ability to run lower tire pressures and improve traction and rolling resistance - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 27mm internal rim width supports 42c -2.25" tires

When pushing the highest speeds in time trial and triathlon racing, the SES 7.8 will provide you an unmistakable aero advantage. The outright fastest wheelset in ENVE’s line is well proven in the world’s biggest races. The SES 7.8 features asymmetric rim geometries with the rear rim at 80mm deep and 27.5 mm wide, designed to improve the efficiency of the airflow in the system of bike frame and wheels when paired together. - Full carbon rim is optimized for improved aerodynamics, and provide better tubeless performance - Tubeless compatible design allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 78mm rear depth and 19mm internal rim width supports an Aero Optimized design around 25mm tires - Rims are pre-taped and tubeless ready

As the most versatile wheel in the line, the SES 3.4 is the go-to for just about any terrain or surface conditions. The high-volume design of the rim and Wide Hookless Bead technology not only makes the SES 3.4 a modern road wheel that is raced at the World Tour level, but it’s also a favorite for mixed surface events due to its feature benefits that clearly separate it from other wheels in the same depth category. Pinch-flat resistance, low weight, and an aero profile optimized around high-volume tires are key features of the SES 3.4, making it the most adept all-around wheel. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 42mm rear depth and 25mm internal rim width supports minimum tire sizes of 27mm, with an Aero Optimized design around 29mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready

Silent, stealthy and quick engaging. The TR37 / Onyx Vesper wheels are perfectly suited for riders that navigate towards trail riding. Featuring Onyx’s revolutionary sprag clutch, the fastest rolling hub on the market, with a completely silent freehub when coasting, and engages instantly when you drop the hammer. All NOBL wheelsets come taped with valves and ready to go! Simply throw your tires on with sealant and you’re set! - Full carbon fiber design and construction - Onyx Vesper Hub - Includes pre-installed tubeless tape and NOBL alloy valve stem

Arch S2 wheelsets have the versatility to handle a wide range of riding conditions and are the ideal upgrade for Trail, AM, Enduro, and eBikes. When your average ride includes both tough climbs and rough descents and you want the best tubeless system in the business, the Arch S2 is for you. - Versatile 28mm internal rim width optimized for 2.2-2.5" tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs offer fast 8.18 deg engagement with reinforced pawls - Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes a 3-year E-sync hub warranty, a 3-year S2 rim warranty, a 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed requires additional valve stems

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

Double-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at competitive pricing. These wheels are the new standards in repair staples. - Shimano hub - Rim brake use - Includes Schrader-to-Presta rubber rim grommet - Includes skewer

Double-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at competitive pricing. These wheels are the new standards in repair staples. - Rim brake use - Made with components rated by their manufacturer as suitable for e-bike use

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Upgrading to a set of quality tubeless wheels is the number one way to improve the ride of your XC or Gravel bike. Tubeless offers more comfort and control with less rolling resistance, and when it comes to tubeless, nothing beats the easy inflation and performance of Stan's patented Bead Socket Technology. First introduced over 15 years ago, the original Crest rim design with BST helped launch the tubeless revolution. Today's Crest S2 wheels offer quick and easy inflation, the legendary airtight seal, and a 25mm width that offers incredible stability for 40mm to 2.3" Gravel and XC tires. - 25mm rim width optimized for Gravel and XC tires up to 2.3" - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs offer fast 8.18 deg engagement with reinforced pawls - Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6" tires. - Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes a 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6" tires. - Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs offer fast 8.18 deg engagement with reinforced pawls - Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

Upgrading to a set of quality tubeless wheels is the number one way to improve the ride of your XC or Gravel bike. Tubeless offers more comfort and control with less rolling resistance, and when it comes to tubeless, nothing beats the easy inflation and performance of Stan's patented Bead Socket Technology. First introduced over 15 years ago, the original Crest rim design with BST helped launch the tubeless revolution. Today's Crest S2 wheels offer quick and easy inflation, the legendary airtight seal, and a 25mm width that offers incredible stability for 40mm to 2.3" Gravel and XC tires. - 25mm rim width optimized for Gravel and XC tires up to 2.3" - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes a 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6” tires. - Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6” tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs offer fast 8.18 deg engagement with reinforced pawls - Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

The 65 Foundation wheel provides best-in-class aerodynamics and confidence-inspiring cross-wind stability to assist you in your hardest efforts in time trial and triathlon racing. The 65 offers a ton of value and is loaded with Enve technology, like shapes derived in a wind tunnel, tuned carbon laminates, and built-in flat tire protection. The sum of these parts isn’t just a faster ride, it’s a better ride experience. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 65mm depth and 21mm internal rim width, Aero Optimized design to support 25 - 28mm tires. For use with Tubeless tires only

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. There’s no better option for the uncompromising climber who values performance up and down the mountain than the new SES 2.3. At sub-1200 grams, they’re in a league of their own and deliver a real-world advantage in hilly terrain through their lightweight design and confidence-inspiring handling. - Full carbon rim features continuously running fibers throughout the rim, tapering laminates, and removing excess material, the SES 2.3 achieves an impressive feat in weight reduction and composites engineering. Additionally, layering fibers in specific orientations achieves zone-specific performance requirements like impact toughness, stiffness, and tire retention - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel

Trainer Caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Cold weather and short days are never far from a Minnesotan's mind so Wolf Tooth engineers created Trainer Caps to reduce barriers to winter workouts. Non-drive side axle caps are joined by drive-side plugs that can be installed or removed without tools to make the prospect of hopping on the trainer a little more bearable. - Compatibility: Wolf Tooth Rear Axles (not compatible with rear axles from other manufacturers) - Plug has O-ring retention – no tool required

These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm

Let’s face it, modern downhill tracks are not for the faint of heart. From the moment you drop in, it’s a hari cari mix of boulders, roots, bumps and jumps awaiting you, and literally the only thing keeping you upright and connecting you to the ground is your wheels. It’s serious business, and the abuse of a day riding DH is no joke, but the Reserve 31 DH wheels have your back. - Designed for DH riding and racing - Carbon fiber construction with 5mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Fulcrum hits the dirt with new Rapid Red 5 disc brake gravel wheels. - 2 Way Fit Ready - Tubeless Ready - 2:1 Spoke Ratio for improved torque balacing - Asymetric rim for improve performances and handling - Straight pull spokes for performance and durability consistency - Included DRP protection for longer bearing lifespan - Factory installed tubeless tape

TR37 / Industry Nine Hydra wheels are the go-to choice for riders seeking top tier performance, with almost instant engagement. Known for being incredibly easy to service, Hydra hubs will offer years of reliable performance. When paired with TR37 rims, you end up with a wheel that’s ready to tackle anything from loose loamers to chunky backcountry epics. All NOBL wheels come pre-taped with valves and ready to go! Simply throw your tires on with sealant and you’re set! - Designed and tested on the World Cup circuit, NOBL TR37 rims are right at home chasing podiums at your local enduro, or session laps after work - Full carbon fiber design and construction - I9 Hydra hub - Includes pre-installed tubeless tape and NOBL alloy valve stem

The Hazard Lite front wheel features a Odyssey Hazard Lite rim laced to an Odyssey Vandero Pro hub. - 7075-T6 aluminum hub shell with 6903RS sealed cartridge ball bearings - Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life - 17mm 7075-T6 aluminum axle with steel helicoil thread inserts -3/8” heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot - Replaceable plastic hub guards included Learn More » - Vandero Pro Hub

The Hazard Lite front wheel features a Odyssey Hazard Lite rim laced to an Odyssey Vandero Pro hub. - 7075-T6 aluminum hub shell with 6903RS sealed cartridge ball bearings - Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life - 17mm 7075-T6 aluminum axle with steel helicoil thread inserts - 3/8” heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot - Replaceable plastic hub guards included Learn More » - Vandero Pro Hub

The Hazard Lite Freecoaster Rear Wheel features an Odyssey Hazard Lite rim laced to an Odyssey Clutch freecoaster hub. - Clutch v2 has a full 14mm chromoly axle and more slack than the original - 36H, 2014-T6 aluminum shell with 9t driver - Super-durable drag mechanism design and bearing arrangement throughout - Plastic hub guard included (but optional to use) - Right and Left Side Drive Confrigurations

The Rampage Pro rear wheel features an aluminum hub shell with precision sealed bearings, 9 tooth driver and 14mm heat-treated chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Aluminum hub shell with Heat-treated chromoly axle - CNC alloy cones and Sealed bearings - 1-piece chromoly (9T) driver -Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H - Two Thermalite Drive and Non-drive Hub Guards Included - Cassette style hub and Clutch-style freecoaster hub options - Left-hand and Right-hand drive configurations

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings

Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by a lifetime warranty - Built with DT Swiss Hubs

Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

- Extra security against theft - 5mm hex CrMo axle

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains Tubeless Rim Tape, two CNC-machined black tubeless valves and two pouches of No Puncture Hassle Tubeless Sealant.

CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel. - Length: 298mm - Spoke Interface: Straight Pull

- SRAM, MTH 406, Freehub Body, 11.2015.018.100

A rock-steady classic for road riding. - 18mm inner width - Professional tubeless tape installation included

Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires

Grade 10 chromium steel balls MR17287LLB - 17 x 28 x 7mm 6808LLB - 30 x 42 x 7mm

Similar to the stock wheel for Surly's Long Haul Trucker.

Circos is Teravail’s carbon gravel rim. Speedy, smooth, and backed by a lifetime warranty, Circos improves your connection to the terrain on every ride. These rims are engineered for a perfect fit with all Teravail gravel tires, which means easy tubeless setup, optimized tire profiles and plenty of options. -25mm internal rim width -Hookless rim design with thick flange holds up to gravel adventures -Reinforced rim spoke bed with washers for extra durability -Front- and rear-optimized rim drilling for better spoke bracing angles -Optimized for use with Teravail Tubeless Tape, valves, and tires -370 grams -Lifetime warranty for original owner under appropriate use

Circos is Teravail’s carbon gravel rim. Speedy, smooth, and backed by a lifetime warranty, Circos improves your connection to the terrain on every ride. These rims are engineered for a perfect fit with all Teravail gravel tires, which means easy tubeless setup, optimized tire profiles and plenty of options. -25mm internal rim width -Hookless rim design with thick flange holds up to gravel adventures -Reinforced rim spoke bed with washers for extra durability -Front- and rear-optimized rim drilling for better spoke bracing angles -Optimized for use with Teravail Tubeless Tape, valves, and tires -370 grams -Lifetime warranty for original owner under appropriate use

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

Arch S2 wheelsets have the versatility to handle a wide range of riding conditions and are the ideal upgrade for Trail, AM, Enduro, and eBikes. When your average ride includes both tough climbs and rough descents and you want the best tubeless system in the business, the Arch S2 is for you. - Versatile 28mm internal rim width optimized for 2.2-2.5" tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes 3-year E-sync hub warranty, a 3-year S2 rim warranty, a 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed requires additional valve stems

E30 HD wheelsets offer the perfect balance of stiffness, performance, durability, and weight. Achieve more traction and stability to increase confidence while squaring off turns and diving for the inside lines; these wheels deliver quick acceleration and pop to get the entire bike lofted into the air and carry momentum over the toughest obstacles. - Designed for Trail, all-mountain and enduro E-riding - Reinforced rim bed for impact resistance - Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes. - Rated for e-bike use - Built with Industry Nine Hubs

E30 HD wheelsets offer the perfect balance of stiffness, performance, durability, and weight. Achieve more traction and stability to increase confidence while squaring off turns and diving for the inside lines; these wheels deliver quick acceleration and pop to get the entire bike lofted into the air and carry momentum over the toughest obstacles. - Designed for Trail, all-mountain, and enduro E-riding - Reinforced rim bed for impact resistance - Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes. - Rated for e-bike use - Built with Industry Nine Hubs

Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6" tires. - Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer a 47% increase in max torque capacity over Neo hubs - Connection program includes a 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

Let’s face it, modern downhill tracks are not for the faint of heart. From the moment you drop in, it’s a hari cari mix of boulders, roots, bumps, and jumps awaiting you, and literally, the only thing keeping you upright and connecting you to the ground is your wheels. It’s serious business, and the abuse of a day riding DH is no joke, but the Reserve 31 DH wheels have your back. - Designed for DH riding and racing - Carbon fiber construction with 5mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

Built by hand, including stainless steel spokes, rim tape and black nipples ready to roll.

Designed with the goal of balancing performance and comfort, the Wind 57 guarantees fluid handling and versatility. These wheels are not solely for road use, as they can also handle light off-road riding too (ASTM category 2), so your ride can extend beyond traffic-congested roads. The Wind 57 inherits many of Fulcrum’s proprietary technologies, to offer a superior ride feel compared to the previous generation. Handling and reactivity characteristics have been improved to make these versatile and comfortable wheels perfect for the modern cyclists. - Wind rims are higher and wider than the previous generation. At the same time the overall weight has been reduced, thanks to the new mix of carbon fibers and their layup inside the mould - Rim height has been raised to 57 mm respectively, with an inner rim channel of 23 mm to accommodate larger tires - Patented DRSC (Directional Rim-Spoke Coupling) system is used in the construction of the rim to provide greater stiffness and durability of the wheel - The no-holes MOMAG assembly technology allows for a 2-WAY FITT tubeless rim, without the need for tubeless rim tape and the presence of the traditional hook ensures the maximum compatibility will all tube-type and tubeless tires on the market and the maximum safety for riders - Build with stainless steel butted spokes, with self-locking aluminum nipples and laced with the Two-to-One system to increase wheel strength - Forged alloy hubs with sealed bearings to minimise wear and guarantee exceptional smoothness - The ratchet system of the freewheel has been reinforced and increased in size to provide 36 points of engagement - Redesigned graphics and visible technical information

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards