Wheels
$129.99
Replacement Freehub body for OOZY Trail R142/135, SPIKE R135/142, or SPIKE DH R150/157 Rear hubs. Compatible with all OOZY hubs and wheels. Compatible only with SPIKE and SPOON wheels (135mm and 150mm) produced in 2016 or later (with SPIKE hubs).
$99.99
- A high performance alloy rim designed for freeride, race and downhill use
- Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place
- 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction
- The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material
- Shotpeen finish to increase fatigue life and make it more durable
$69.90
These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.
$49.00
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- One-piece design
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6mm hex wrench required for installation
$39.00 - $40.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- One-piece design
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6 mm hex wrench required for installation
$32.00
Salsa's Stainless Flip-Offs use stainless steel rods for corrosion-resistant strength. They're strong, lightweight, and gorgeous.
- Recommended for front rigid fork or full suspension use
- Beautifully machined and hand friendly
- Variety of sizes, sold as pairs or individually, front or rear
- Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter
- More than just eye candy, they’re hand candy, as well
- Weight: 49g
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$77.00
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Right Axle End Cap
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$34.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite.
Features
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$33.00
CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel.
- Length: 298mm
- Spoke Interface: Straight Pull
$19.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
$19.00 - $24.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
$79.00
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Drive Side Axle End Cap
$72.00
Replacement freehub body for Sram 900 series hubs
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more.
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The stainless steel axle end allows for mounting of the hitch provided with your trailer.
- Hardware for attachment of the hitch is included; the hitch, itself, is not.
- No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$1,599.00
Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails.
- Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by a lifetime warranty
- Built with DT Swiss Hubs
$1,899.00
Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails.
- Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by a lifetime warranty
- Built with Industry Nine Hubs
$2,199.00
Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction.
- Designed for XC riding and racing
- Carbon fiber construction with 2.8mm asymmetric offset
- Step-in internal rim bed to ease tubeless installation
- Lower profile for added lateral stiffness with increased vertical compliance
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by Santa Cruz lifetime warranty
$1,599.00
Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction.
- Designed for XC riding and racing
- Carbon fiber construction with 2.8mm asymmetric offset
- Step-in internal rim bed to ease tubeless installation
- Lower profile for added lateral stiffness with increased vertical compliance
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by Santa Cruz lifetime warranty
$1,799.00
E30 HD wheelsets offer the perfect balance of stiffness, performance, durability, and weight. Achieve more traction and stability to increase confidence while squaring off turns and diving for the inside lines; these wheels deliver quick acceleration and pop to get the entire bike lofted into the air and carry momentum over the toughest obstacles.
- Designed for Trail, all-mountain and enduro E-riding
- Reinforced rim bed for impact resistance
- Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes.
- Rated for e-bike use
- Built with Industry Nine Hubs