Filter By:
- Parts (52)
- Wheels (7)
- Tires/Tubes (4)
- Accessories (4)
- Clothing (3)
- Car Racks (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Your Search: "bar tape"
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs.
- Gel tape with natural cork feel
- Ideal stretch for quick and easy installation
- Inner gel strip for extra comfort
- Finishing strips and reflective Bontrager bar end plugs included
- Non-adhesive backing
$41.99
Take care of your hands with an ergonomic, paddle-shape design that evenly distributes pressure across your hands and helps reduce hand fatigue. The Satellite Elite Grip features a dual-density compound that offers variable padding and unparalleled vibration absorption to ensure comfort on every ride.
Key features
- Dual-density compound design provides secure grip, control, and comfort
- Contoured design comfortably supports palm to decrease fatigue
- Lock-on clamp securely holds grip core to bar, eliminating slipping
$9.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
$9.95
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$64.95
Go tubeless with Conti's Tubeless-Ready Set.
- 1 x 5-meter roll of tubeless rim tape (25mm)
- 3 x tire levers
- 3 x cleaning/mounting cloths
- 2 x tubeless valves (40mm)
- 1 x Revo Sealant (240ml)
- Instructions
$84.99
Taking on the toughest mountain biking or gravel cycling routes requires maximum comfort. The Core Offroad XT Shorts deliver. With soft durable fabric gives you exceptional ventilation while a double layer of elastic knitted fabric around the waist ensures a smooth fit and ultimate freedom of movement. Thoughtful details such as two front pockets with pocket lids, one zip pocket a the back with reflective tape and a waistband with a hook solution for easy adjustment round out this essential cycling short.
- Soft and durable fabric with excellent ventilation
- Double layer of elastic knitted fabric at waist for a smooth fit and freedom of movement
- Two front pockets with pocket lids for safe storage
- Zip pocket at back with reflective tape for additional items
- Waistband with hook solution for easy adjustment
FIT: Athletic
FABRIC: 94% Polyamide, 6% Elastane
*As a Swedish brand our products can fit long and lean. Sorry, but some say it is what makes us fast! So, if your normal fit is typically between sizes we suggest sizing up.
**Model in BURGUNDY is 5'9" and wearing a size small.
$94.99
This advanced cycling jersey brings dynamic styling and ultimate comfort to your toughest off-trail rides. Freedom of movement and superior moisture transport make the Offroad SS jersey optimal for high intensity mountain biking and gravel cycling. Two zipper pockets, three open back pockets, silicone tape at back bottom hem for keep the jersey in place along with silicone print at shoulders for improved grip when carrying a backpack are thoughtful details that put the Offroad SS jersey at the front of the line for essential off-road cycling gear.
- Functional fabric that provides great moisture transport and comfort
- Five pockets (two zip)
- Three open back pockets with enlarged size
- Silicone tape at back bottom hem keeps the jersey in place
- Silicone print at shoulders for improved grip when carrying a backpack
- Reflective tape details
$94.99
The sweater is made of a soft, elastic and durable material that provides effective temperature control. The garment also has five pockets, silicone print on the shoulders and silicone tape at the back.
- Functional material with efficient moisture transport
- Five pockets (two with zipper)
- Silicone print on the shoulders for secure grip when cycling with a backpack
- Silicone tape in the back end keeps the sweater in place
- Reflective details
$39.99
- For carrying unique frames on hang-on type car racks
- Quick release clamp adjusts to fit between stem and seatpost
- Rubberized hooks protect bikes finish
$29.99
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike.
- Designed for City-Trekking use
- Not intended for mountain biking
- Bar Clamp Diameter (mm): 25.4
- Color: Black
- Lever Compatibility: Mountain 22.2
- Weight: 479g
- Width: 585mm
$39.99
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing.
- Made from 6061 Aluminum
- Single-groove cable routing
- Accessory Mount Diameter (mm): 26.0
- Bar Clamp Diameter (mm): 26.0
- Bar Drop (mm): 128
- Bar Reach (mm): 80
- Bar Top Style: Round
- Clip-on Compatible: No
- Drop Bend Style: Compact
- Material: Aluminum
- Weight: 340g (40cm)
- Width Measurement: Center
$47.99
These are 31.8mm flat top road drop bars with very shallow reach.
- Double-butted and tapered 6061-T6 aluminum bars
- 120mm wide center section with 31.8mm diameter
- Flat top bar with cable grooves
- Accessory Mount Diameter (mm): 31.8
- Bar Clamp Diameter (mm): 31.8
- Bar Drop (mm): 125
- Bar Reach (mm): 70
- Bar Top Style: Flat
- Clip-on Compatible: Yes
- Color: Black
- Defined Color: Black
- Drop Bend Style: Compact
- Material: Aluminum
- Weight: 266g
- Width: 38cm
- Width Measurement: Center
$40.00
Features and Benefits
- 250cm in Length—accommodates bars up to 50cm
- Grip compound maintains traction when wet
- Durable stretch for installation
- Vibration-damping backer strip
- Hard-wearing construction
- 3mm thick
What It Is
ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability.
Science & Insight
For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$8.99
Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
BENEFITS:
ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade!
- Easy to Install
- Hassle Free
- Self-Bonding
- No Residue
- No Adhesives
- UV Resistant
NO CLEAN UP:
The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed!
USES:
There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs.
Some other great uses include:
- Tool Handles
- Finishing Tape
- Protecting Wear Points
- And Much More
The possibilities are endless!
$18.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included.
- 60 Grams
- Standard Grip Length – 5 1/8"
- 32mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included.
- 80 Grams
- Standard Grip Length – 5 1/8"
- Installed Dia. 34mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$24.99
Chunky XL 6.75” are over 30% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$30.99
Chunky XXL 8.25” are over 60% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$31.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky.
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$32.95
- 2mm thick, ergonomic handlebar tape for all road bike disciplines
- EVA foam distributes pressure and reduces hand discomfort
- Tape is durable and provides increased vibration damping
- Anti-slip surface texture
- Built-in wrapping guide for thinner or thicker wrapping
- Wrap in two directions; for increased grip or more freedom of movement
$37.95
- 2.5mm thick, ergonomic handlebar tape for all road bike disciplines
- EVA foam distributes pressure and reduces hand discomfort
- Tape is durable and provides increased vibration damping
- Anti-slip surface texture
- Built-in wrapping guide for thinner or thicker wrapping
- Wrap in two directions; for increased grip or more freedom of movement
$49.95
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality.
- Carbon bar compatible
- Uses: mountain biking, touring, commuting
- Clamp: fiberglass composite with rubber inserts
$54.95
The GS-grip combined with a compact 2-finger bar end made out of fiberglass reinforced composite, which offers more hand positions for increased comfort on long mountain bike rides. Additional rubber is used on the bar end improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex.
- Carbon bar compatible
- Uses: mountain bike, marathon, XC
$59.95
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality.
- Carbon bar compatible
- Clamp: fiberglass composite with rubber inserts
- Uses: touring, commuting
$64.95
The GS3 combines comfort in a lightweight package, ideal for long distance endurance athletes. The three-finger bar end is made out of fiberglass reinforced composite, which offers more hand positions for increased comfort and leverage on long mountain bike rides. Additional rubber is used on the bar end, improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex.
- Carbon bar compatible
- Bar end: fiberglass composite with rubber inserts
$69.95
The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability.
- Carbon bar compatible
- Bar end material: fiberglass composite with rubber inserts
- Uses: mountain biking, touring, commuting
$79.95
The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality.
- Not suitable for use with carbon handlebars
- Uses: touring, commuting
- Clamp: fiberglass composite with rubber inserts
$29.99 - $34.99
Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Microtex is the thinnest option for pin-sharping handling and control. Its tacky finish aids a sticky nonslip surface with a raised texture for ultimate grip in every condition.
- Microtex construction 2mm thick
- Tacky touch
Page 1 of 3
Next page