Your Search: "chain lube"

- 6mm square chain with textile sleeve to protect against damage to the paintwork - The chain is made of specially hardened steel - Very practical use because only one end of the chain must be locked

Subtle and modern Equipped with a combination of numbers, the lock is easy to use. The complete plastic coating of the lock body and the distinctive textile hose of the chain prevent damage to the paint on the bicycle to be secured. - 7mm square chain with fabric sleeve to prevent damage to the bicycle‘s paintwork - The chain is made of specially hardened steel - Two-component molded digits guarantee life-long visibility - Special touch protection for higher security against unauthorized access to the code through manipulation of the mechanism - Individually settable code

The Right Combo for Proper Security This lock is easy to use, equipped with two-component molded digit tumblers that ensure the digits are permanently visible. The complete plastic coating of the lock body and the distinctive textile tube of the chain prevent damage to the bike. - 8mm chain with fabric sleeve to prevent damage to the bicycle's paint - The chain is made of specially hardened steel - Two-component number tumblers guarantee long-term readability of the digits - Individually configurable code

The two clamps that can be attached individually are a great advantage of the Chain Claw 10 handcuff lock. This makes the lock particularly suitable for securing e-scooters. But it can also be used for bicycles. The robust Chain Claw 10 is the launch product for a new type of lock: the handcuff lock. With a 7 millimetre diameter, 10 centimetre long, specially hardened steel chain, the bike lock provides convenient security in the ABUS quality users are familiar with. The clamps can be rotated 360 degrees thanks to integrated joints, and are therefore extremely flexible. In addition, they have scratch protection for optimal protection of frames on bicycles and scooters. To open the clamps without a key, enter a personally selected 4-digit opening code on both sides. The Chain Claw 10 has the ABUS security level 8 and thus offers good theft protection for securing of high-value items such as e-bikes, cargo bikes, e-scooters and pushchairs, for short periods. Thanks to this lock, every outing becomes a safe riding experience. - 7 mm square chain - The chain is made of specially hardened steel - Rotating joints and two different engagement points for the sleeves provide maximum flexibility - Opening code can be set individually

The high-quality XPlus cylinder on the Steel-O-Chain 9808K chain lock provides excellent protection against manipulation of the lock and thus against theft. No matter if someone tries to break into the bike lock or the XPlus cylinder with conventional tools, or even special ones – they won’t get very far. The built-in XPlus cylinder and the 8 millimetre specially hardened steel chain provide great theft protection. In order to protect the paintwork on the bike in the long run, the chain is covered with a textile sleeve. Even the keyhole has a cover to protect it from dirt and corrosion. Well secured, your bike can be parked with no worries. - 8 mm square chain. - The chain, housing and structural parts of the locking mechanism are made of specially hardened steel. - Automatic keyhole cover to prevent corrosion and the ingress of dirt. - ABUS XPlus cylinder for the greatest protection against manipulation such as picking. - Great protection for when there is a high risk of theft - Two keys included.

The Steel-O-Chain™ 9809K Chain Lock provides great protection against theft with an XPlus locking cylinder specially developed by ABUS The ABUS XPlus cylinder built into the lock body is even more picking-resistant than its predecessor and offers excellent protection against manipulation of the bicycle lock. The 9-millimetre square chain as well as the housing and structural parts of the locking mechanism are made of specially hardened steel. The lock has been awarded ABUS security level 12 out of 15. In order to protect the paintwork on the bike in the long run, the steel chain is covered with a textile sleeve. Even the keyhole has a cover to protect it from dirt and corrosion. Well secured, your bike can be parked with no worries. - 9mm strong square chain - The chain, housing, and structural parts of the locking mechanism are made of hardened steel - ABUS Plus Cylinder - Automatic keyhole cover to prevent corrosion and the ingress of dirt

For a thank you from the future you Quickly and easily apply this assembly lubricant to any fastener on your bike to help prevent corrosion and seizing. Your bike (and mechanic) will thank you because we all know that a little assembly lube now can save a lot of elbow grease down the road. Product details - The anti-corrosion and anti-seizing formula is compatible with thread lockers - Precise applicator tip makes it super easy to apply - Pleasing cinnamon scent - Apply directly to any threaded fastener on the bike, usually one drop is enough - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Keep out of reach of children and do not ingest

A versatile chain lube that provides lasting lubrication for a smooth, quiet, and efficient ride. Bontrager's proprietary chain lube is a true hybrid to ensure your chain stays clean, quiet, and efficient. The long-lasting formula lets you go longer between applications. Product details - High-performance chain lube works great in all conditions and riding styles - Proprietary formula is Trek's factory-recommended chain lube - Helps maintain clean, long-lasting, and efficient drivetrains - Pleasing berry scent - Apply after your ride and allow to dry to keep your drivetrain clean - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Also available in 0.5g/1.9L bulk bottle for easy and economical refills - Keep out of reach of children and do not ingest

The Bontrager Kids Combo Chain Lock offers a kid-friendly design with unique color options and symbols on the dial that make it easier for little ones to remember their combination. The 75cm chain is made from hardened steel, and it's the perfect length for function without being bulky. Plus, it's wrapped up in a fun, colored fabric sheath that looks great and protects bikes from scratches and scuffs. - Steel chain links for secure protection in a 75cm length - Unique combo dial features kid-friendly, easy-to-remember symbols - Fun, colorful fabric sleeve protects bike from scratches and scuffs - 75cm length makes lock easy to use without being bulky - Security rating 3

A keyed chain lock that provides secure protection thanks to a durable 9mm hardened steel chain. Our most secure chain lock We've partnered with ABUS to offer best-in-class bike security. The Bontrager Ultimate Keyed Chain Lock offers reliable protection with 9mm hardened steel links and a security rating of 9. It's covered in a fabric sheath to protect your bike frame and give it a nice finished look. Product details - 9mm temper-hardened steel chain links for secure protection in an 85cm length - Anti-drill plate at keyhole provides added protection against picking - Fabric sleeve for a classy look and feel that protects bike paint from scratches - Versatile linked-chain design for quick and easy security - Industry-leading corrosion resistance - Includes chain lock and 2 keys (replacement keys available) - Security rating 9

Elegant style meets incredible weight savings with the XXX Cable and Housing set. It's time to take your road machine to the next level. Linked alloy housing is up to 40% lighter than traditional alternatives, while also being more flexible and incredibly smooth for class-leading performance. Product details - This lightweight, flexible, and elegant kit is perfect for the demanding rider - Compatible with road brake systems - Ultra-low-friction cables are 2300mm and 1700mm long, for front and rear road brakes - Diameter: 5mm - XXX housing features Pro lube and is lighter, more flexible, and stiffer than standard - Kit includes XXX brake ferrules, frame protectors, and cable end caps - For installation instructions, visit: trekbikes.com/manuals - Included stainless steel cables are rust-proof and come pre-stretched

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

HG, Needle Applicator, Chain lube,18 ga

Our Classic Freehub Oil is a great addition for the bicycle market and another superior product from Dumonde Tech. Freehub Oil is the original lubricant on the market specifically designed for Pawl style freehubs which require a lightweight lubricant. Freehub Oil performs consistently throughout a wide temperature range. "Flow Point" is -40 degrees, is extremely low friction, providing the greatest protection. Simply follow the manufacturer's specification for the volume of oil required in your freehub body to experience the superior performance of Dumonde Tech's Freehub Oil. With Freehub Oil being lightweight, growing reports for other applications have been reported. It can be used as cable lube and brake lever lubricant for the small moving parts and the lightweight spring action they have. Time and cold temperatures do not affect the performance of Freehub Oil like with heavier viscosity, time and temperature aged greases. They become thicker and stickier as they age slowing down the parts action.

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.

The industry's original and most versatile dry-style bicycle lubricant is now formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free, sets up with a dry ‘wax-like’ film, attracts less dirt and grime, and delivers a low coefficient of friction over long re-lubrication intervals. Dry Lube is especially recommended for riding on or off-road in dry, dirty, dusty environments, yet it holds up well in moderately wet conditions. Dry Lube can also be used on derailleurs, shifters, cables, and brake pivot points. Finish Line's Dry Lube provides optimum drivetrain efficiency without attracting an excessive amount of abrasive contaminants. Features: - Formulated with Non-Stick Ceramic Technology - Quickly sets up dry and clean - Low surface tension - 100% Fluoro-free Benefits: - Lowers friction, improves pedaling efficiency, and reduces wear - Minimizes the attraction of abrasive contaminants - Easily penetrates chain pins and coats pivot points - Meets the highest standards of biodegradability

The Finish Line® Drivetrain Kit offers three of our most popular products in one convenient package for easy and effective bike maintenance. This all-in-one kit includes the Grunge Brush™ for scrubbing away tough grime, EcoTech™ Degreaser for powerful, eco-friendly cleaning, and Dry Lube for versatile, long-lasting lubrication. Ideal for keeping your drivetrain in top condition, the Finish Line® Drivetrain Kit is a must-have for cyclists who want a clean, efficient, and smooth-running bike.

HALO® WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance by reducing friction and wear caused by abrasive contaminants, delivering long-lasting lubrication. Designed for dry and dirty conditions, this advanced formula ensures maximum chain cleanliness, making it ideal for cyclists seeking top performance. Developed in a state-of-the-art laboratory and field-tested by leading professional teams, HALO® WAX applies as a liquid and dries to a durable wax coating that is completely dry-to-the-touch, providing a clean and efficient drivetrain. Each bottle of HALO® WAX comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WAX and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

HALO® WET chain lubricant is expertly engineered to deliver unparalleled drivetrain performance and extended relubrication intervals in both clean/dry and wet conditions. Designed using advanced laboratory-developed chemistries and rigorously field-tested by top professional teams, HALO® WET ensures ultra-low friction, superior mileage, and ultimate water and rust resistance. This high-performance liquid formula is easy to apply, goes on wet, and is ready to ride immediately, providing cyclists with reliable lubrication for any weather or terrain. Each bottle of HALO® WET comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WET and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

Finish Line's Shop Quality Chain Cleaner is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning, while your hands stay clean. Plus, its rugged plastic construction is virtually unbreakable.

HALO® HOT WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance, reducing friction and wear from abrasive contaminants over extended relubrication intervals. Developed with advanced lab-tested chemistries and proven in the field by top professional teams, it provides peak performance in all riding conditions. The wax dries quickly on the chain, leaving it clean to the touch, while offering complete water and rust resistance. For convenience, HALO® HOT WAX comes in specially designed, easy-to-use bags—simply boil the bag to melt the wax pellets inside. Each reusable bag contains 600g of wax, providing enough for approximately 25 chain dips. The included Immersion Tool simplifies the chain dipping process, making it efficient and hassle-free.

Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Multi-functional all in one chain tool! -Tire lever -Convenient MissingLink storage -Valve core tool -Accurate chain latch - Easy to attach

Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link

S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No

The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link

- X8.99: stretchproof, chamfered plate, full-nickel plated chain for 5-8 speed and great for internal geared hubs - Z72: chamfered inner plates with Bulls-eye rivets for 5-8 speed - Z51: standard bushingless, chamfered plate chain for 5-8 speed - Z30: economy bushingless chain for 5-8 speed - Width = 3/32-inch

Portable Mini Chain Tool

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

With the REACT series, KMC has filled a gap in its lineup of drive solutions. Just like KMC chainrings and sprockets, REACT cassettes are precisely designed to match KMC chains. This perfect synergy reduces friction between individual components and enhances the lifespan of all drive components. Meticulously crafted ascent and descent ramps ensure precise chain guidance, improving shifting performance across the entire range. Made from high-strength steel, REACT cassettes are compatible with Shimano HG - Lifting and lowering ramps provide improved shifting performance, overall component interaction efficiency and stability - Unique lifting ramps design carries the chain smoothly upward on the cogs - Distinctive lowering ramps adeptly align the chain quickly - Cogs sizes are design to provide smoother shifting and precise chain indexing to suit all riders - Optimized for use with KMC e11, X11, X11 EL, and X11 SL chains

-X11SL DLC: superlight chain for use with 11-speed Campagnolo/Shimano/Sram with Diamond Like Coating for extra durability, 235g -X11SL: superlight chain for use with 11-speed Campagnolo/Shimano/Sram (Gold color is Ti Nitride coating), 235g

- 5.5mm plug-in chain to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 9mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long

Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.

- 9mm PLUG-IN CHAIN to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 5.5mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 9mm steel chain links - 120cm long

- 7mm four-sided chain links made from 3t manganese steel - Patent-pending end link design secures chain to hardened deadbolt eliminating critical vulnerability - Hardened deadbolt design provides extra holding power - High security disc-style cylinder is pick and drill resistant - Includes 2 new ergonomic “I” keys - Durable weather-resistant nylon sleeve prevents scratches - Key Safe Program - Product dimensions: 47.3” (120cm) chain length - Product weight: 3.75 lbs (1.70 kgs)

- Ring Lock with PLUG-IN CAPABILITY - Non-Key Retaining (key can be removed from lock) - Key Retaining version available (key cannot be removed from lock while unlocked) - Includes 5.5mm plug-in chain - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include 10mm cable and 9mm chain - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long

Kryptonite's KryptoLok Series 2 995 Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This 37.5-inch chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

- 9mm four-sided chain links made from 3t manganese steel - Patent-pending end link design secures chain to hardened deadbolt eliminating critical vulnerability - Hardened deadbolt design provides additional protection - High security disc-style cylinder is pick and drill resistant - Patent pending integrated lock head with “talon” deadbolt - Includes 2 new ergonomic “I” keys - Durable weather-resistant nylon sleeve prevents scratches - Key Safe Program - Product dimensions: 47.25” (120cm) chain length - Product weight: 6.7 lbs (3.04 kgs)

Kryptonite's Evolution Series 4 1055 Mini Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated, boron-manganese steel for maximum strength. At 21.5 inches long, the Evolution gives your bike security in a pint-size package. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish, and it uses an integrated high-security cylinder that is pick, drill, and cut resistant. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

Kryptonite's Evolution Series 4 1090 Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated manganese steel for maximum strength. At 35.5-inches long, the Evolution gives you biking security in an easy-to-carry package. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish, and it uses an integrated high-security cylinder that is pick, drill, and cut resistant. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

Kryptonite's KryptoLok Series 2 915 Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated, boron-manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This five-foot chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

Kryptonite's Evolution Series 4 1016 Integrated Chain is a 10mm-thick, six-sided link chain made of triple-heat-treated, boron-manganese steel for maximum strength. At over five feet long, the Evolution gives you plenty of chain to lock up multiple bikes. It uses an integrated high-security cylinder that is pick, drill, and cut resistant. The links are covered with a weather-resistant nylon sleeve that protects your bike's finish. Three keys are included, including one that has a high-intensity LED bulb for convenient, easy unlocking in the dark. This chain has an anti-theft protection offer.

Kryptonite's New York Cinch Ring Chain is a 12mm, six-sided link chain made of triple heat-treated, manganese steel giving it maximum strength. The chain includes a special larger cinch ring design for maximum usable length, lighter weight and less bulk than full length chains. It secures with Kryptonite's Evolution Series 4 Disc Lock that boasts a 14mm hardened steel shackle for top-notch security. Three keys are also included, with one featuring a high-intensity LED bulb for convenient, easy unlocking in the dark. This New York Cinch Ring Chain has an anti-theft protection offer.

Kryptonite's New York Fahgettaboudit is a 14mm, six-sided link chain made of triple heat-treated, boron manganese steel giving it extreme strength. The chain is covered with a durable nylon covering that protects your bike against scratches. This 3.25-foot chain secures with Kryptonite's New York Disc Lock that boasts a 15mm steel shackle for serious security. Plus, three keys are included, with one that has a high intensity LED bulb for convenient, easy unlocking in the dark. This New York Chain has an anti-theft protection offer.

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application