Your Search: "chain lube"

- 6mm square chain with textile sleeve to protect against damage to the paintwork - The chain is made of specially hardened steel - Very practical use because only one end of the chain must be locked

Chain locks have always enjoyed great popularity among experienced cyclists. This is not surprising, as they have some unique properties. Just like the Catena 6806. For one thing, the lock is lightweight and easy to transport. It can be stored folded in a bag or alternatively wrapped around the seat post of the bike. On the other hand, it is so flexible that it is possible to chain your bike to almost any location without any problems. The Catena 6806 can still fit in even in the tightest of spaces and can be used whenever the bike is used. Technology: - 6mm thick square chain with textile sleeve that prevents damage to paintwork - The chain is made of specially hardened steel Operation and use: - Good protection at low theft risk - Recommended for securing entry-level bicycles

Whether bicycle racks or street lamps, the Steel-O-Chain 8807 offers maximum flexibility. At the same time, it offers high comfort with its automatic cylinder. This means that it locks as soon as the end piece is inserted. Active locking with the key is not necessary. Technology: - 9/32" thick square chain with textile sleeve that prevents damage to paintwork - The chain, the lock body and supporting elements of the locking mechanism are made of specially hardened steel Operation and use: - Good protection at medium theft risk - Recommended for securing good bicycles - The longer the chain, the easier the bicycle can be locked to a fixed object

A Material That Offers Resistance The concept that the IvyTex technology is based on has already been in use for several years in industrial applications in areas subjected to high wear, where moving parts have to be protected against wear and tear. ABUS has taken advantage of this concept by using it in the sleeves for its chain locks. The effect of this is twofold: it provides protection against wear and tear, as well as preventing the chain from causing damage to the bicycle. IvyTex technology has many other benefits aside from its durability. The hi-tech fabric is also highly flexible as well as weatherproof and resistant to liquids. This prevents water from being absorbed by the fabric, thereby protecting the locks against corrosion. Its durability also means that there's no excuse for not securing your bicycle, even if the weather is bad and you worry about the lock getting dirty. - 7mm square chain with functional, long-lasting, and highly-flexible mesh sleeve to prevent damage to the bicycle's paint - The sleeve offers very high protection against abrasion and does not absorb any liquids, e.g. water or oil - The chain, the case, and supporting elements of the locking mechanism are made of specially hardened steel

The Right Combo for Proper Security This lock is easy to use, equipped with two-component molded digit tumblers that ensure the digits are permanently visible. The complete plastic coating of the lock body and the distinctive textile tube of the chain prevent damage to the bike. - 8mm chain with fabric sleeve to prevent damage to the bicycle's paint - The chain is made of specially hardened steel - Two-component number tumblers guarantee long-term readability of the digits - Individually configurable code

The two clamps that can be attached individually are a great advantage of the Chain Claw 10 handcuff lock. This makes the lock particularly suitable for securing e-scooters. But it can also be used for bicycles. The robust Chain Claw 10 is the launch product for a new type of lock: the handcuff lock. With a 7 millimetre diameter, 10 centimetre long, specially hardened steel chain, the bike lock provides convenient security in the ABUS quality users are familiar with. The clamps can be rotated 360 degrees thanks to integrated joints, and are therefore extremely flexible. In addition, they have scratch protection for optimal protection of frames on bicycles and scooters. To open the clamps without a key, enter a personally selected 4-digit opening code on both sides. The Chain Claw 10 has the ABUS security level 8 and thus offers good theft protection for securing of high-value items such as e-bikes, cargo bikes, e-scooters and pushchairs, for short periods. Thanks to this lock, every outing becomes a safe riding experience. - 7 mm square chain - The chain is made of specially hardened steel - Rotating joints and two different engagement points for the sleeves provide maximum flexibility - Opening code can be set individually

The high-quality XPlus cylinder on the Steel-O-Chain 9808K chain lock provides excellent protection against manipulation of the lock and thus against theft. No matter if someone tries to break into the bike lock or the XPlus cylinder with conventional tools, or even special ones – they won’t get very far. The built-in XPlus cylinder and the 8 millimetre specially hardened steel chain provide great theft protection. In order to protect the paintwork on the bike in the long run, the chain is covered with a textile sleeve. Even the keyhole has a cover to protect it from dirt and corrosion. Well secured, your bike can be parked with no worries. - 8 mm square chain. - The chain, housing and structural parts of the locking mechanism are made of specially hardened steel. - Automatic keyhole cover to prevent corrosion and the ingress of dirt. - ABUS XPlus cylinder for the greatest protection against manipulation such as picking. - Great protection for when there is a high risk of theft - Two keys included.

The Steel-O-Chain™ 9809K Chain Lock provides great protection against theft with an XPlus locking cylinder specially developed by ABUS The ABUS XPlus cylinder built into the lock body is even more picking-resistant than its predecessor and offers excellent protection against manipulation of the bicycle lock. The 9-millimetre square chain as well as the housing and structural parts of the locking mechanism are made of specially hardened steel. The lock has been awarded ABUS security level 12 out of 15. In order to protect the paintwork on the bike in the long run, the steel chain is covered with a textile sleeve. Even the keyhole has a cover to protect it from dirt and corrosion. Well secured, your bike can be parked with no worries. - 9mm strong square chain - The chain, housing, and structural parts of the locking mechanism are made of hardened steel - ABUS Plus Cylinder - Automatic keyhole cover to prevent corrosion and the ingress of dirt

For a thank you from the future you Quickly and easily apply this assembly lubricant to any fastener on your bike to help prevent corrosion and seizing. Your bike (and mechanic) will thank you because we all know that a little assembly lube now can save a lot of elbow grease down the road. Product details - The anti-corrosion and anti-seizing formula is compatible with thread lockers - Precise applicator tip makes it super easy to apply - Pleasing cinnamon scent - Apply directly to any threaded fastener on the bike, usually one drop is enough - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Keep out of reach of children and do not ingest

A versatile chain lube that provides lasting lubrication for a smooth, quiet, and efficient ride. Bontrager's proprietary chain lube is a true hybrid to ensure your chain stays clean, quiet, and efficient. The long-lasting formula lets you go longer between applications. Product details - High-performance chain lube works great in all conditions and riding styles - Proprietary formula is Trek's factory-recommended chain lube - Helps maintain clean, long-lasting, and efficient drivetrains - Pleasing berry scent - Apply after your ride and allow to dry to keep your drivetrain clean - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Also available in 0.5g/1.9L bulk bottle for easy and economical refills - Keep out of reach of children and do not ingest

Longer length, easier to lock Bontrager has partnered with ABUS to offer best-in-class bike security. The Bontrager Comp Keyed Chain Lock provides secure protection and industry-leading corrosion protection. The chain is 110cm in length and is made of 4mm hardened steel. It's covered in a fabric sheath to protect your bike frame and give it a nice finished look. Product details - 4mm temper-hardened steel chain links for secure protection in a 110cm length - Fabric sleeve for a classy look and feel that protects bike paint from scratches - Versatile linked-chain design for quick and easy security - Industry-leading corrosion resistance - Includes chain lock and 2 keys (replacement keys available) - Security Rating 3/15: basic security and protection against theft. Great for locking your bike to take a quick stop in low risk areas

The Bontrager Kids Combo Chain Lock offers a kid-friendly design with unique color options and symbols on the dial that make it easier for little ones to remember their combination. The 75cm chain is made from hardened steel, and it's the perfect length for function without being bulky. Plus, it's wrapped up in a fun, colored fabric sheath that looks great and protects bikes from scratches and scuffs. - Steel chain links for secure protection in a 75cm length - Unique combo dial features kid-friendly, easy-to-remember symbols - Fun, colorful fabric sleeve protects bike from scratches and scuffs - 75cm length makes lock easy to use without being bulky - Security rating 3

A keyed chain lock that provides pro-level protection through a durable 8mm hardened steel chain. Love your bike, lock your bike Bontrager has partnered with ABUS to offer best-in-class bike security. The Bontrager Pro Keyed chain lock provides secure keyed protection with an anti-drill key plate and industry-leading corrosion protection. The chain is made of 8mm hardened steel and covered in a fabric sheath to protect your bike frame and give it a nice finished look. Includes two keys. - 8mm temper-hardened steel chain links for secure protection in an 85cm length - Anti-drill plate at keyhole provides added protection against picking - Fabric sleeve for a classy look and feel that protects bike paint from scratching - Versatile linked chain design for quick and easy security - Industry-leading corrosion resistance - Includes chain lock and 2 keys (replacement keys available) - Security rating 7

A keyed chain lock that provides secure protection thanks to a durable 9mm hardened steel chain. Our most secure chain lock We've partnered with ABUS to offer best-in-class bike security. The Bontrager Ultimate Keyed Chain Lock offers reliable protection with 9mm hardened steel links and a security rating of 9. It's covered in a fabric sheath to protect your bike frame and give it a nice finished look. Product details - 9mm temper-hardened steel chain links for secure protection in an 85cm length - Anti-drill plate at keyhole provides added protection against picking - Fabric sleeve for a classy look and feel that protects bike paint from scratches - Versatile linked-chain design for quick and easy security - Industry-leading corrosion resistance - Includes chain lock and 2 keys (replacement keys available) - Security rating 9

Elegant style meets incredible weight savings with the XXX Cable and Housing set. It's time to take your road machine to the next level. Linked alloy housing is up to 40% lighter than traditional alternatives, while also being more flexible and incredibly smooth for class-leading performance. Product details - This lightweight, flexible, and elegant kit is perfect for the demanding rider - Compatible with road brake systems - Ultra-low-friction cables are 2300mm and 1700mm long, for front and rear road brakes - Diameter: 5mm - XXX housing features Pro lube and is lighter, more flexible, and stiffer than standard - Kit includes XXX brake ferrules, frame protectors, and cable end caps - For installation instructions, visit: trekbikes.com/manuals - Included stainless steel cables are rust-proof and come pre-stretched

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

The Feedback Sports Chain Tool 3.0 is designed to work with 1–12 Shimano, 1–12 SRAM, and 13 speed Campagnolo. Features a 360 degree backside plate support structure to ensure chain pins are pressed perfectly, every time. - Oversized, comfortable, knurled texture rubber handle provides secure grip - Broad, high-leverage pin press paddle makes quick work of the most stubborn chain pins - Soft close push pin handle - CNC-machined pin driver threads provide deliberate and consistent pressure for efficient pressing - Compatible with Shimano and SRAM 7, 8, 9, 10, 11, 12 speed chains, and single-speed style chains - Extra replacement pin included, conveniently secured inside storage cavity in the handle - Limited lifetime warranty; fully serviceable

Because you love your bikes, when you’re not riding them you’re washing them, tuning them, or traveling to the ultimate ride destination. The Chain Keeper is the perfect solution to keeping your bike chain secure for bike washing, tune-ups and traveling. The elegant CNC machined design fits standard quick-release or 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel. - Protects rear derailleur by maintaining chain tension when the rear wheel is removed - Ideal bike service tool for washing, tune-ups and traveling - Accommodates road bikes, cyclocross bikes, mountain bikes, electric bikes, fitness bikes and more - Fits standard 9mm Quick-Release style dropouts - Fits 12mm Thru-Axle dropouts - Prevents the chain from slapping against delicate and painted frame surfaces - High-density Delrin roller is easy on your chain, yet incredibly durable - CNC machined aluminum body is corrosion-resistant and comfortable in-hand - Tool-free, single-hand design makes use simple and effective for beginner or professional bike mechanics

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.

The Finish Line® Premium Bike Care Value Pack offers a three-pack of our best-selling maintenance products: EcoTech™ Degreaser, Super Bike Wash™, and Dry Lube. Designed to make bike self-servicing simple and efficient, the Premium Bike Care Value Pack provides everything cyclists need to degrease, wash, and lubricate their bike. With these essentials, keeping your bike in top condition has never been easier.

The Finish Line® Drivetrain Kit offers three of our most popular products in one convenient package for easy and effective bike maintenance. This all-in-one kit includes the Grunge Brush™ for scrubbing away tough grime, EcoTech™ Degreaser for powerful, eco-friendly cleaning, and Dry Lube for versatile, long-lasting lubrication. Ideal for keeping your drivetrain in top condition, the Finish Line® Drivetrain Kit is a must-have for cyclists who want a clean, efficient, and smooth-running bike.

HALO® WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance by reducing friction and wear caused by abrasive contaminants, delivering long-lasting lubrication. Designed for dry and dirty conditions, this advanced formula ensures maximum chain cleanliness, making it ideal for cyclists seeking top performance. Developed in a state-of-the-art laboratory and field-tested by leading professional teams, HALO® WAX applies as a liquid and dries to a durable wax coating that is completely dry-to-the-touch, providing a clean and efficient drivetrain. Each bottle of HALO® WAX comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WAX and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

HALO® WET chain lubricant is expertly engineered to deliver unparalleled drivetrain performance and extended relubrication intervals in both clean/dry and wet conditions. Designed using advanced laboratory-developed chemistries and rigorously field-tested by top professional teams, HALO® WET ensures ultra-low friction, superior mileage, and ultimate water and rust resistance. This high-performance liquid formula is easy to apply, goes on wet, and is ready to ride immediately, providing cyclists with reliable lubrication for any weather or terrain. Each bottle of HALO® WET comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WET and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

Finish Line's Shop Quality Chain Cleaner is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning, while your hands stay clean. Plus, its rugged plastic construction is virtually unbreakable.

HALO® HOT WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance, reducing friction and wear from abrasive contaminants over extended relubrication intervals. Developed with advanced lab-tested chemistries and proven in the field by top professional teams, it provides peak performance in all riding conditions. The wax dries quickly on the chain, leaving it clean to the touch, while offering complete water and rust resistance. For convenience, HALO® HOT WAX comes in specially designed, easy-to-use bags—simply boil the bag to melt the wax pellets inside. Each reusable bag contains 600g of wax, providing enough for approximately 25 chain dips. The included Immersion Tool simplifies the chain dipping process, making it efficient and hassle-free.

Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link

The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link

Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible. - Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles - Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98 - Width: 13.1 mm - Drivetrain Speeds: Single Speed 1/2" x 3/16" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 800g

The KMC Z8.1 Rustbuster is an 8-speed chain suitable for trekking, MTB, and city touring. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Z bridge outer plate offers extended compatibility - Rustbuster coating provides anit-rust protection - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 8 - Chain Connection Type: Reusable Master Link

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Portable Mini Chain Tool

- X8.99: stretchproof, chamfered plate, full-nickel plated chain for 5-8 speed and great for internal geared hubs - Z72: chamfered inner plates with Bulls-eye rivets for 5-8 speed - Z51: standard bushingless, chamfered plate chain for 5-8 speed - Z30: economy bushingless chain for 5-8 speed - Width = 3/32-inch

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Stretch-proof treatments provides exceptional durability - Hollow pin construction reduces chain weight - Links (links): 100 - Color: Black - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin - Half Link Chain: Yes

KMC, X11 GY/GY, Chain, Speed: 11, 5.5mm, Links: 118, Grey

The KMC K1SL SuperLite Kool Chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear, while offering substantial weight savings. - SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability - The mud-shedding design is easy to clean - Chain features a heavy duty structure and is treated with a stretch proof treatment for maximum durability - Designed with KMC's Special Dynamic K Configuration which offers unsurpassable chain strength - Inner plate chamfering provides expeditious shifting - Features an anti-drop design - Links (links): 100 - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Weight: 349 g

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation

With the REACT series, KMC has filled a gap in its lineup of drive solutions. Just like KMC chainrings and sprockets, REACT cassettes are precisely designed to match KMC chains. This perfect synergy reduces friction between individual components and enhances the lifespan of all drive components. Meticulously crafted ascent and descent ramps ensure precise chain guidance, improving shifting performance across the entire range. Made from high-strength steel, REACT cassettes are compatible with Shimano HG - Lifting and lowering ramps provide improved shifting performance, overall component interaction efficiency and stability - Unique lifting ramps design carries the chain smoothly upward on the cogs - Distinctive lowering ramps adeptly align the chain quickly - Cogs sizes are design to provide smoother shifting and precise chain indexing to suit all riders - Optimized for use with KMC e11, X11, X11 EL, and X11 SL chains

-X11SL DLC: superlight chain for use with 11-speed Campagnolo/Shimano/Sram with Diamond Like Coating for extra durability, 235g -X11SL: superlight chain for use with 11-speed Campagnolo/Shimano/Sram (Gold color is Ti Nitride coating), 235g

S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No

The KMC e12 Chain is designed for use with 12-speed eBike systems. - Features KMC's highest pin power for unsurpassed riveting geometry - KMC's Triple X durability - Double "X" bridge shape allows for precise gear shifting - This chain is eBike compatible thanks to its high torsion resistance - Outer plate chamfering allows for accurate shifting - Inner plate chamfering allows for expeditious shifting

- 5.5mm plug-in chain to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 9mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long

Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.