Filter By:
Your Search: "chain lube"
$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
The Chain Gang includes:
- CM-5.3 Cyclone Chain Scrubber
- GSC-1 GearClean Brush
- 8 oz. bottle of Bio ChainBrite
The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
$35.00
The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear.
- Compatible with Shimano, SRAM, and Campagnolo drivetrains
- Stretch-proof treatments provides exceptional durability
- Hollow pin construction reduces chain weight
- Links (links): 100
- Color: Black
- Width: 9.5 mm
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Bullet Pin
- Half Link Chain: Yes
$25.00
- X9SL: superlight chain for use with 9-speed, 252g
- X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed
- Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation
- Width = 11/128-inch
$19.99
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Proven and reliable KMC 510-HX chain
- Factory installed half-link for a radically stronger set-up
$18.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$13.00
Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible.
- Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles
- Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98
- Width: 13.1 mm
- Drivetrain Speeds: Single Speed 1/2" x 3/16"
- Chain Connection Type: Reusable Master Link
- Half Link Chain: No
- Weight: 800g
$179.00
Created for the specific demands of E-MTB, the XX1 Eagle Single Click shifter is for the dream E-build. It's designed to help eliminate premature chain wear and chain breaking by limiting the pull lever to a single engagement. With no detail spared, the carbon trigger and trigger cover save weight while gliding on precise, near-frictionless sealed cartridge bearings—you simply cannot find a better shifter for E-MTB.
- E-MTB specific—limits the pull lever to a single engagement to help eliminate premature chain wear and chain breaking
- Carbon trigger and cover reduce weight
- Master XX1 Eagle group colorway to match all cassette and chain colors as part of Eagle Colorsystem
$21.49 - $27.99
- Fast and effective grease-cutting formula
- Removes all chain oil and wax residue
- Safely eliminates drive chain contaminants
- Biodegradable
- Ideal for use with chain cleaning devices
- Trigger spray included for easy application on cassettes, chainrings and derailleurs
- Safe for metal, plastic, rubber and seals
$61.95
- Ring Lock with PLUG-IN CAPABILITY
- Non-Key Retaining (key can be removed from lock)
- Key Retaining version available (key cannot be removed from lock while unlocked)
- Includes 5.5mm plug-in chain
- Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft
- Plug-in options also include 10mm cable and 9mm chain
- Kryptonite and AXA ring locks/plug-in options are compatible
- 5.5mm steel chain links
- 120cm long
$29.99
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia.
The Pro model is designed to improve on the original K-EDGE Chain Catcher design:
- Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher
- Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher
- Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains
- Material: 6061-T6 CNC machined Aluminum
- Fitment: All braze-on mounted front derailleurs*
- Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs
* Not compatible with Campy EPS
* May not work with all third-party braze-on adapter clamp. Shimano
- Made in Boise, Idaho, USA,
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$74.00 - $85.00
SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime.
- The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain
- X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise
- Designed to be used with Eagle chain
- 104mm BCD
$49.00
Because you love your bikes, when you’re not riding them you’re washing them, tuning them, or traveling to the ultimate ride destination. The Chain Keeper is the perfect solution to keeping your bike chain secure for bike washing, tune-ups and traveling. The elegant CNC machined design fits standard quick-release or 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel.
- Protects rear derailleur by maintaining chain tension when the rear wheel is removed
- Ideal bike service tool for washing, tune-ups and traveling
- Accommodates road bikes, cyclocross bikes, mountain bikes, electric bikes, fitness bikes and more
- Fits standard 9mm Quick-Release style dropouts
- Fits 12mm Thru-Axle dropouts
- Prevents the chain from slapping against delicate and painted frame surfaces
- High-density Delrin roller is easy on your chain, yet incredibly durable
- CNC machined aluminum body is corrosion-resistant and comfortable in-hand
- Tool-free, single-hand design makes use simple and effective for beginner or professional bike mechanics
$25.00
The KMC K1SL SuperLite Kool Chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear, while offering substantial weight savings.
- SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability
- The mud-shedding design is easy to clean
- Chain features a heavy duty structure and is treated with a stretch proof treatment for maximum durability
- Designed with KMC's Special Dynamic K Configuration which offers unsurpassable chain strength
- Inner plate chamfering provides expeditious shifting
- Features an anti-drop design
- Links (links): 100
- Width: 9.5 mm
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Single Use Master Link
- Weight: 349 g
$23.00
- X8.99: stretchproof, chamfered plate, full-nickel plated chain for 5-8 speed and great for internal geared hubs
- Z72: chamfered inner plates with Bulls-eye rivets for 5-8 speed
- Z51: standard bushingless, chamfered plate chain for 5-8 speed
- Z30: economy bushingless chain for 5-8 speed
- Width = 3/32-inch
$24.00
The KMC K1SL SuperLite Kool Chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear, while offering substantial weight savings.
- SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability
- The mud-shedding design is easy to clean
- Chain features a heavy duty structure and is treated with a stretch proof treatment for maximum durability
- Designed with KMC's Special Dynamic K Configuration which offers unsurpassable chain strength
- Inner plate chamfering provides expeditious shifting
- Features an anti-drop design
- Links (links): 100
- Width: 7.7 mm
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Single Use Master Link
- Weight: 377 g
$10.95
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
$74.00
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise.
- Designed to be used with Eagle chain
$30.95
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts.
- Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes
- Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain
- Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess
- Sturdy handle makes the Cyclone easy to use and control
- Holds 2 fluid ounces (59ml) of solvent
$19.99
White Lightning's Chain Johnny solves the problem of how to transport and store your bike with the possible greasy mess. The Chain Johny uses a 2-ply rubber and nylon case with Velcro closures to slip over your drivetrain so the mess stays inside. Never worry about leaving greasy chain marks or tearing your upholstery again.
$47.95
Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.
$18.00
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes
$47.95
An easily accessible hidden compact chain tool kit housed in handlebar ends for your mountain bike. Features CrMo steel chain tool for single and multi-speed chains up to 13 speed, including SRAM Flattop chains and Campagnolo hollow pin chains. Included chain hook holds links during assembly.
- Chain tool requires 4mm bit, or wrench to operate
- Material: hardened steel / engineering grade polymer
- Limitations: handlebar ends with minimum 105mm straight section ID range ø17 - ø21 mm
- Weight: 52 g / 1.83 oz
$107.00
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear.
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise.
- Designed to be used with Eagle chain
- Boost 3mm offset
$128.00
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear.
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise.
- Designed to be used with Eagle chain
- Boost 3mm offset
$43.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP).
*The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets.
- Comfortable T-handle
- Replaceable driving pin (CTP)
- Investment cast steel body
- Adjustable locating shelf
$191.95
Kryptonite's New York Cinch Ring Chain is a 12mm, six-sided link chain made of triple heat-treated, manganese steel giving it maximum strength. The chain includes a special larger cinch ring design for maximum usable length, lighter weight and less bulk than full length chains. It secures with Kryptonite's Evolution Series 4 Disc Lock that boasts a 14mm hardened steel shackle for top-notch security. Three keys are also included, with one featuring a high-intensity LED bulb for convenient, easy unlocking in the dark. This New York Cinch Ring Chain has an anti-theft protection offer.
$123.00
The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap.
- X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap
- Large upper pulley offset automatically adjusts chain gap
- Sealed cartridge bearings and aluminum cage
- Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock
- Medium cage: 11-26 through 11-36 cassettes, 269g
- Long cage: 10-42 cassette, 275 g
$243.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel.
- A dedicated 1x rear derailleur
- EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement).
- 10- and 11-speed compatible
- X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement
- X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force
- ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting
- Cage Lock technology makes for fast wheel changes or chain installation
- Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths
Short Cage:
Chain Wrap Capacity (teeth): 18 teeth
Largest Cog: 28
Weight: 250 g
Medium Cage:
Chain Wrap Capacity (teeth): 26 teeth
Largest Cog: 36
Weight: 262 g
Long Cage:
Chain Wrap Capacity (teeth): 32 teeth
Largest Cog: 42
Weight: 271 g
$123.00
SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever.
• Long cage
• X-Horizon design reduces shift force, ghost shifting, and chain slap
• 12-tooth X-Sync pulley wheels
• Large upper pulley offset automatically adjusts chain gap
• Sealed cartridge bearings
• Aluminum Cage
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains