Brakes/Levers/Pads

- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

The cores of brake performance are consistency, reliability, and trust. And, with G2 R, we focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed "Mini-Code" power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite - Engineered for easy installation and maintenance - Tools-free reach adjust for quick personalization

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Caliper only - does not include lever or hose. - Includes steel-backed organic pads

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

Magura mt thirty disc brake and lever - front or rear hydraulic post mount black - Carbotecture radial master - Flip-flop, easy bleed design - Carbotecture lever-blade and handlebar clamp - 4-piston forged monobloc caliper - Adjustable reach - Adjustable banjo fitting

- Super light due to the Carbotecture SL housing - High braking power thanks to the new ergonomic 1-finger HC Carbon lever blade - Suitable for mounting left or right - Reach Adjust: 3mm allen key

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

- High performance compounds recommended for all-conditions - Steel backing

Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.

Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT

We spend a lot of time obsessing over feel, and SwingLink technology brings our best R&D to life. The G2 RS offers riders the joys of SwingLink—getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite - Bleeding Edge for simple fluid installation and maintenance - Tool-free reach adjust for quick personalization

Magura ebt connector fitting for hs33/hs11 m9 thread - Small parts used to install hydraulic hose for Magura disc brakes.

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

Hose fittings for Hayes hydraulic disc brakes

The SRAM RED brakeset improves on all fronts: it’s lighter, more aerodynamic and leverages more braking power. What’s more, it features broader tire clearance. A classic made modern. - AeroLink arm amplifies braking power while reducing frontal area - Lighter, aero pad retainers carry SwissStop Flash Pro pads standard - Aero design extends to the shape of the indexed four-position quick release - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match new SRAM RED eTap AXS - Reach: Standard

Guide Ultimate Lever Assembly

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

Just because you eschew gears doesn't mean you're willing to settle for heavy, retro brake levers. Welcome to single speed paradise with SRAM's 900 Single Speed Brake Levers. The unidirectional carbon levers are impressively light and SRAM's renowned ergonomic hoods are always comfy. Set up your single speed rig right with SRAM's 900 brake levers.

Shiftmix adaptors allow a shifter to clamp directly to a Magura brake lever, expanding setup possibilities.

Lockrings for Magura rotors.

Cover kits for Magura brake levers.

Caliper only - does not include lever or hose. - Compatible with all SRAM road hydraulic brake levers - Includes steel-backed organic pads - 18mm Front/Rear - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT - Pad Compound: Organic

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

- Clearly defined bite point and maximum power make it the first choice for gravity and high-speed pilots - 1-finger HC lever blade modulates the enormous braking power as desired - Suitable for mounting left or right

- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Optimized for Race Pads - Optimum heat dissipation - High durability - Wear indicators - Rounded edge - UCI approved - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Steel - Disc Technology: 2-piece design

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

- Special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads - In addition, maximum heat resistance and stability - E-Bike optimized - 6 steel mounting screws included

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. - Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

Magura Storm Rohloff Disc Rotor - 4-bolt silver - The Magura Storm disc rotor is designed for use with Rohloff Speedhubs. - Designed to offer exceptional cooling - Low noise - 2mm rotor thickness

As SRAM’s first direct mount road brake, the S-900 does more than just complete SRAM’s road brake product line. It has a design that delivers great power and superior feel. The design reduces what engineers call “splay force,” sending energy into the brake instead of the frame and fork. This results in a more efficient transfer of energy from lever to rim, making for solid modulation and a snappy return. The brake provides clearance for up to 28c tires and is compatible with all non-hydraulic SRAM road levers, including SRAM RED eTap. - Direct mount (Rear) - Compatible with non-HRD SRAM road shift-brake and brake levers - Sold individually - Front and rear compatible – fork and seat stay mount only - Includes SwissStop Flash Pro Yellow King pads - Solid feel, power, and modulation with a snappy return - Wider clearance for modern wheelsets - Brake type: Mechanical - Pad type: Cartridge - Reach (RB): Standard - Compat - Cable pull: Cantilever/Road - Hardware: Stainless Steel

SRAM's Rival 22 Front Brake Caliper delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brake offers excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, the handy quick-release, and adjustment barrel.

Disc brake caliper assembly - (assembled, no hose) diffusion black ano - minteral fluid brake - db8 (a1)

Magura hs33/hs11 sleeve nut bag of 10 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

Wireless shifting and the best hydraulic disc braking anywhere, plus revolutionary eTap shift logic. What more could you want? While we could have stopped there, we went further and optimized the hood shape to fit hands of all sizes for comfortable and controlled braking from any position. AXS technology means personalization is in your hands. - AXS-enabled for easy personalization - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Optimized hood shape fits a wider range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalize fit for more hand sizes

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Rebuild kit for Hayes hydraulic disc brakes. - Include pistons, seals, and other parts necessary for service.

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

The Odyssey Evo 2.5 Brake features a wider space to accommodate larger tires. - Forged from aluminum for strength - More clearance for larger tires - Front or rear brake compatible - Includes all necessary hardware

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts

Magura type 5. 1 performance pads for marta 2008 and prior - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate

Magura type 5. 2 endurance pads for marta 2008 and prior - Endurance series disc pads feature a harder organic compound than the Performance series, giving them a longer wear life but less power. - Steel backing plate

With comfortable hoods and lightweight aluminum levers, SRAM's S500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.

Magura mt4 estop disc brake and lever - front or rear hydraulic post mount black The Magura MT4 eSTOP disc brake is optimized for the requirements of modern e-bikes. it offers controlled power for both off-road and city tours, and is particularly reliable thanks to optimized components. - The eSTOP system is based on Magura's MT design - The MT4 is proof that versatility and outstanding performance for E-Bikes don’t have to be expensive - 2-finger aluminum lever blade is durable and light weight - Can be mounted on either the left or the right - When combined with Magura MDR-C or MDR-P rotors, the MT5 eSTOP offers even higher braking power and stability - Magura Sport brake pads included