Stems

The perfect fit The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration. Product details - Blendr Elite allows seamless accessory integration - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Suitable for both MTB or road use - Includes Blendr mono base and accessory mounts

The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm

Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.

From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)

Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40

Electra's Cruiser Aluminum Stem is a stable, solid replacement for your original equipment. Designed to work with a 1-inch headset, the Cruiser Stem is made from no-frills aluminum that keeps off the weight while maintaining strength where you need it.

The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm

A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.

A stem may not seem like the most exciting bike part, but it's in our DNA to care about it in great detail. After all, no other part has such a dramatic effect on your riding position and thus your speed, comfort, and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design comes together in a moving sculpture. Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, particularly in combination with our new drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. - Material: Alloy 6061 - Steerer diameter: 28.6mm (1 1/8") - Handlebar diameter: 31.8mm - Key size: 4mm Allen key - Steerer bolt torque: 5Nm - Faceplate bolt torque: 5Nm

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt

Velo Orange Removable Faceplate Quill Stem. For any classic roadie, tourer, mtb, or any other bike with a 1-inch threaded steerer. These stems feature a simple 2-bolt removable faceplate for use with any handlebars including modern bars with 31.8mm clamp diameters. The 90 degree extension gives a bit of rise without looking out of place on a custom build. - Height above insert: 130mm - Use shims for 25.4 handlebars (sold separately)

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately

A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost

Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro! - Low-Near = 17° rise / 77mm length - Low-Far = 100° rise / 110mm length - Mid-Near = 50° rise / 67mm length - Mid-Far = 45° rise / 110mm length - High-Near = 80° rise / 67mm length - High-Far = 75° rise / 110mm length

A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware

A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer. Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer. Product details - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - High-strength, corrosion-resistant steel bolts - Includes Blendr mono base, Garmin Mount, and Ion Light Mount - Approved for carbon bars

An oversized 35mm stem that is lightweight and durable for the burliest mountain riders. Oversized and in control Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from 6061-T6 3D aluminum, this finely finished stem provides the increased strength of the latest mountain-specific bar diameter at the lightest weight possible. Product details - Pro-level quality stem in oversized 35mm clamp diameter for increased strength and minimal weight - Forged from 6061-T6 3D aluminum - Laser etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects the frame from impacts by fork and handlebars by eliminating over-rotation of bars - High-strength corrosion-resistant steel bolts ensure the freshest look for longer - Available in a wide range of sizes for today's mountain rider - Safe for carbon bars

Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look