(312) 751-2488   |   Mon-Fri 10am - 9pm   |   Sat-Sun 10am - 6pm
NATION'S LARGEST BIKE STORE

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Once you find the part you need, order it for shop pick up and call the service department to set up installation.
X-Fusion X-Fusion Seatpost Seal Kit
$25.00 - $40.00
X-Fusion's Seal Kits have what you need to freshen up your dropper post and keep dirt out. - 25mm Kit is for posts with 25mm shafts and fits all Hilo posts with 125mm travel except for SL and Strate - 22mm Kit is for posts with 25mm shafts and fits 27.2mm models and 1st generation Hilo posts with 100mm travel in 30.9 and 31.6mm diameters - SL Kit fits SL dropper posts only - Strate Kit fits Strate dropper posts only
Wolf Tooth Components ReMount
$19.95 - $34.95
Offered in multiple sizes and applications, Wolf Tooth Components' ReMount places your dropper lever in a more ergonomic position tha allows you to keep a better grip on the bar while actuating your dropper post. - Available in standard 22.2mm diameter for MTB bars, as well as Shimano I-Spec A&B, I-Spec II, and SRAM MatchMaker options - Designed to work with cable-actuated dropper levers with pivots parallel to the handlebar's length - Allows a dropper post remote to be below the bar and on its side for better ergonomics
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$19.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wolf Tooth Components Set of 5 Chainring Bolts+Nuts For 1x
$24.95 - $34.99
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs. - Design and manufactured in Minneapolis, MN USA - 7-8 NM tightening torque with light grease on threads only - Material - 7075-T6 aluminum - Weight - 5 bolts = 10 grams
Wolf Tooth Components ReMote Dropper Post Lever
$64.95 - $69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Whisky Parts Co. Top Cap Compression Plug
$19.95
The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.
Whisky Parts Co. Compression Plug
$34.95
- 1-1/8-inch Whiskey Parts and Co. Compression plug
Trek Adjustable Rear Mount Kickstand
Key features - Adjustable length kickstand that mounts to the rear triangle - Adjustable length adapts to nearly all bikes with 24"-29" wheels - Installation flexibility allows for disc brake and rim brake compatibility
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Syntace X-12 Derailleur Hanger And Parts
$8.95 - $13.50
- Syntace x-12 Derailleur hangers and screws are only compatible with frames that have Syntace x-12 Dropouts.
Shimano Di2 E-Tube Wire
$25.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
Salsa Single Frame Plug for Dropper Routing 5-pack
$4.99
Single Frame Plug for Dropper Routing
Salsa Alternator 1.0 Set Screws
$5.00
Alternator 1.0 Set Screws
Salsa Chainstay Protector
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
Salsa Alternator 1.0 Hardware Kit
$10.00
Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.
Salsa Alternator Hardware Set for 2013 Ti and all Steel frames
$10.00
Ensure your bike's rear wheel is secure with Salsa Alternator Hardware Set for 2013+ Ti and all steel frames.
Salsa Lock-on Collars
$10.00
- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips
Salsa Split Pivot Cable Guide Sevice Kit
$10.00
Salsa Pivot Service Kits
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
Salsa Salsa's Split Pivot Dropout Tool Top Cap
$13.99
Salsa's Split Pivot Dropout Tool might get you out of a jam, adding no weight to your equipment. This handy tool works as a headset top cap until you need it, and when combined with a 6mm hex wrench, turns into a socket for removing the Pivot Bolt to change your derailleur hanger - Lightweight aluminum bolt - For all Salsa Split Pivot suspension models - Integrated 22mm socket design interfaces axle nut to field-change the derailleur hanger - Operated via 6mm hex key found on most mini tools - Takes place of standard top cap - Eliminates the need to carry a 22mm wrench or socket in your pack - Lightweight, black anodized aluminum bolt included - 13g
Salsa High Direct Mount Front Derailleur Cover
$15.00
Covers front derailleur mount when running 1x
Salsa Lock-on Collars Closed-End
$15.00
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
Salsa Derailleur Hanger
$20.00
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
Salsa Derailleur Hanger For Beargrease Carbon
$20.00
Salsa Derailleur Hanger For Beargrease Carbon
Salsa Downtube Protector
$20.00
Protect your downtube from scratches and damage with Salsa protectors.
Salsa QBP Derailleur Hanger 687 Black
$20.00
Fits: Salsa Colossal Ti 2015, Salsa Warbird 2016, Foundry Overland 2016.
Salsa Lip-Lock
$22.00
Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
Salsa Lip-Lock Seat Clamp
$22.00
Lip-Locks don’t just secure your seatpost. They do it while looking good! Add a little functional bling to your ride. Available in a variety of sizes and color choices. - Non-quick-release version of the Flip-Lock - Stainless steel pivot and bolt - Black, Silver, Blue, Green, Red, and Pink anodized with laser-etched logo - Black = 28.6, 30.0, 30.6, 32.0, 35.0 and 36.4mm - Silver, Blue, Green, Red, Gold, and Pink = 30.0, 30.6, 32.0 -and 35.0mm - Orange, Purple, and Lime = 30.0, 32.0, and 35.0mm - 34g
Page 1 of 5 Next page