Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
When you need extra tread so your feet stay planted, Electra's Chopper Pedals are up to the task. With a durable pedal body and sturdy, smooth-spinning spindles, the Chopper Pedals give you the confidence you need in traffic or even on the trails. - Spindle: 9/16-inch
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair
Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance. Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)
Power Grips Sport Pedal Kits include black Power Grips attached to a pair of quality, metal cage pedals. - Offers increased pedal power and exceptional durability at a low price point - Pedals feature a resin body with steel cage, ball and cone bearings, forged spindle, and a wide platform - The pre-set adjustable bracket easily adjusts to fit different shoe sizes with a Phillips screwdriver and 8mm wrench - 9/16"
- Touring/Cross pedals with light alloy body and toe-clip compatible cage - Don't let the retro looks fool you, this workhorse with its wide platform is great for everyday use
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability. - 15 x 95 x 25mm (L x W x H) - 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal - Designed with grease ports; 'V-lube' grease syringe included with pedals - Double concave pedal body for control and stability - Classic parallelogram shape - 9/16"
$59.95 - $69.95
An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions. - High-impact nylon body built to take abuse - Smooth-running sealed bearing and DU bushing - Electroplated chromoly spindle - Electroplated stainless steel replaceable pins for added grip with shoes or boots - Nylon body doesn't suck heat out of your feet like alloy pedals do - Height: 14mm - Width: 105mm - 9/16"
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
If your favorite ride leads to the beach or perhaps the grass at the local park, Electra's Barefoot Pedals are here. They feel the same way with their foot-friendly platforms and comfy plastic bodies. Treat your feet to smooth comfort with these durable platforms.
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
Simple functionality: that's what Electra's Deluxe Block Pedals offer your favorite cruiser. With plenty of platform for your sneakers, the Deluxe Block Pedals are as comfortable as can be for your entire ride.
- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 520g
Page 1 of 2 Next page