Other
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.78
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.78
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$5.99
Replacement hardware kit for Salsa Alternator Flat Mount dropouts.
- For use only on frames designed for the Alternator Flat Mount standard
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
$6.93
Saddle clamp heads and lowers for KS Dropper posts.
$7.00
Brake Pad Spreader Springs
- Available for Guide Ultimate and Guide X0 brakes
$7.67
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$8.00
Replacement parts for Paul rim brakes.
$8.19
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$8.19
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$8.19
Complete remotes and remote components for KS dropper posts.
$8.19
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$8.95 - $16.50
Replacement derailleur hanger screws for Syntace X-12 system.
$8.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut.
- 6061-T6 aluminum construction.
- Standard 1-1/8-inch size.
$9.00
Hose fittings fit many of SRAM's newest hydraulic brake models.
- Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$9.48
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases.
Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
Key features:
- Bases for use with Elite stem
- Add any XXX accessory mount for an elegant integrated look
$10.00
A five-piece IGUS bushing spacer kit for mounting rear shocks.
- Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet
- Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)
$10.00
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$10.00
This pair of 6" long extenders attaches the Old Man Mountain rack frame to the front fork. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware.
- 6" length
- Includes slots for adjustability
- Made from 6061 aluminum and powder coated matte black for finish and durability
- Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets
- May need to be bent to fit width of frame
- Includes hardware
$10.00
- Open end allows use of bar ends, also while looking good
- Compatible only with Salsa Backcountry Grips
$10.50
CNC machined from advanced performance low friction polymer material, these replacement bushings offer improved fit while reducing friction over stock.
$11.00
- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5
$11.03
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
$12.00
Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.
$12.71
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
$13.23
Replacement EBT screws close the bleed port on Magura brakes.
- Torque spec: 0.5 nM
- T25 head
$13.99
Salsa's Split Pivot Dropout Tool might get you out of a jam, adding no weight to your equipment. This handy tool works as a headset top cap until you need it, and when combined with a 6mm hex wrench, turns into a socket for removing the Pivot Bolt to change your derailleur hanger
- Lightweight aluminum bolt
- For all Salsa Split Pivot suspension models
- Integrated 22mm socket design interfaces axle nut to field-change the derailleur hanger
- Operated via 6mm hex key found on most mini tools
- Takes place of standard top cap
- Eliminates the need to carry a 22mm wrench or socket in your pack
- Lightweight, black anodized aluminum bolt included
- 13g
$13.99
The Vortex Redeux top cap features a unique, lightweight design.
- Machined from 6061 aluminum with a deeply recessed Allen wrench broach - slim shape to better work with stems that have a recessed compression bolt area
- Uses a 6mm Allen key
- 0.5 oz
$13.99
The Vortex Redeux top cap features a unique, lightweight design.
- Machined from 6061 aluminum with a deeply recessed Allen wrench broach - slim shape to better work with stems that have a recessed compression bolt area
- Uses a 6mm Allen key
- 0.5 oz
$14.99
Thermalite material molded into a guard that will protect your Sumo sprocket. Super-strong Chromoly bolts keep this thick guard in place.
- Material: Stolen's Thermalite (Nylon w/Long Glass Fiber)
- Thickness: 7.75mm
- Sizes: Fits 25 tooth Sumo III
- Colors: Black
- Weight: 2.5 oz
$15.00
DPX2 Damper Shaft for FOX suspension service and repair.
- FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.155 TLG, 7.875 X 2.25/2.00
$15.00
- Closed-end design protects end of handlebar while looking good
- Compatible with Salsa Backcountry Grips only
- 30g for pair
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
Page 1 of 6
Next page